W7100A-64QFN WIZnet, W7100A-64QFN Datasheet - Page 98

• Manufacturer Part Number: W7100A-64QFN
• Description: 8-bit Microcontrollers - MCU 8051 CORE+HARDWIRED TCP/IP+MAC+PHY
• Manufacturer: WIZnet

Specifications of W7100A-64QFN

• Rohs: yes
• Interface Type: UART

© Copyright 2011 WIZnet Co., Inc. All rights reserved.
0x100n)][0x0000]
modes.
Sn_PORT (SOCKET n Source Port Register)[R/W][(0xFE4004 + 0x100n) – (0xFE4005 +
It sets source port number.
It is valid when SOCKET n is used as TCP or UDP mode, and ignored when used as other
It should be set before OPEN command.
Ex) In case of SOCKET 0 port = 5000(0x1388), configure as below,
Figure 8.2 SOCKET n Status transition
cf> In UDP and IP RAW mode, the Sn_DIPR register compares
the previous and current values. ARP is only used if the two
values are different.
Ver. 1.12
98