MC9S08QG4MPAE Freescale Semiconductor, MC9S08QG4MPAE Datasheet - Page 75

• Manufacturer Part Number: MC9S08QG4MPAE
• Description: IC MCU 4K FLASH 8-PDIP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08QG4MPAE

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 4
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Controller Family/series: HCS08
• No. Of I/o's: 6
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• Processor Series: S08QG
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 1
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMO9S08QG8E
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

5.8.7
This high page register contains status and control bits for the RTI.
1
2
3
Freescale Semiconductor
RTICLKS
Reset:
Values are shown in this column based on t
tolerance of this value.
The initial RTI timeout period will be up to one 1-kHz clock period less than the time specified.
t
RTIACK
ext
RTIS2:RTIS1:RTIS0
Field
RTIE
RTIS
RTIF
2:0
is the period of the external crystal frequency.
7
6
5
4
W
R
0:0:0
0:0:1
0:1:0
0:1:1
1:0:0
1:0:1
1:1:0
1:1:1
System Real-Time Interrupt Status and Control Register (SRTISC)
RTIF
Real-Time Interrupt Flag — This read-only status bit indicates the periodic wakeup timer has timed out.
0 Periodic wakeup timer not timed out.
1 Periodic wakeup timer timed out.
Real-Time Interrupt Acknowledge — This write-only bit is used to acknowledge real-time interrupt request
(write 1 to clear RTIF). Writing 0 has no meaning or effect. Reads always return 0.
Real-Time Interrupt Clock Select — This read/write bit selects the clock source for the real-time interrupt.
0 Real-time interrupt request clock source is internal 1-kHz oscillator.
1 Real-time interrupt request clock source is external clock.
Real-Time Interrupt Enable — This read-write bit enables real-time interrupts.
0 Real-time interrupts disabled.
1 Real-time interrupts enabled.
Real-Time Interrupt Delay Selects — These read/write bits select the period for the RTI. See
0
7
= Unimplemented or Reserved
Figure 5-9. System RTI Status and Control Register (SRTISC)
RTIACK
0
0
6
Using Internal 1-kHz Clock Source
Table 5-10. SRTISC Register Field Descriptions
MC9S08QG8 and MC9S08QG4 Data Sheet, Rev. 5
Table 5-11. Real-Time Interrupt Period
RTICLKS
0
5
RTI
Disable RTI
128 ms
256 ms
512 ms
1.024 s
64 ms
32 ms
= 1 ms. See t
8 ms
RTIE
0
4
RTI
Description
in the appendix
1 2
Chapter 5 Resets, Interrupts, and General System Control
3
0
0
Section A.8.1, “Control
Using External Clock Source
0
2
Period = t
Disable RTI
t
t
t
t
t
t
ext
ext
t
ext
ext
ext
ext
ext
x 16384
x 32768
x 1024
x 2048
x 4096
x 8192
x 256
RTIS
0
1
ext
Timing,” for the
3
Table
5-11.
0
0
73