PIC18F86K22-I/PTRSL Microchip Technology, PIC18F86K22-I/PTRSL Datasheet - Page 168

• Manufacturer Part Number: PIC18F86K22-I/PTRSL
• Description: MCU PIC 64K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K22-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F87K22 FAMILY
12.2
PORTA is an 8-bit wide, bidirectional port. The corre-
sponding Data Direction and Output Latch registers are
TRISA and LATA.
RA4/T0CKI is a Schmitt Trigger input. All other PORTA
pins have TTL input levels and full CMOS output
drivers.
RA5 and RA<3:0> are multiplexed with analog inputs
for the A/D Converter.
The operation of the analog inputs as A/D Converter
inputs is selected by clearing or setting the ANSEL
control bits in the ANCON1 register. The corresponding
TRISA bits control the direction of these pins, even
when they are being used as analog inputs. The user
must ensure the bits in the TRISA register are
maintained set when using them as analog inputs.
DS39960B-page 168
Note:
PORTA, TRISA and
LATA Registers
RA5 and RA<3:0> are configured as
analog inputs on any Reset and are read
as ‘0’. RA4 is configured as a digital input.
Preliminary
OSC2/CLKO/RA6
serve as the external circuit connections for the exter-
nal (primary) oscillator circuit (HS Oscillator modes), or
the external clock input and output (EC Oscillator
modes). In these cases, RA6 and RA7 are not available
as digital I/O and their corresponding TRIS and LAT
bits are read as ‘0’. When the device is configured to
use HF-INTOSC, MF-INTOSC or LF-INTOSC as the
default oscillator mode, RA6 and RA7 are automatically
configured as digital I/O; the oscillator and clock
in/clock out functions are disabled.
RA5 has additional functionality for Timer1 and Timer3.
It can be configured as the Timer1 clock input or the
Timer3 external clock gate input.
EXAMPLE 12-1:
CLRF
CLRF
BANKSEL
MOVLW
MOVWF
BANKSEL
MOVLW
MOVWF
PORTA
LATA
ANCON1
00h
ANCON1
TRISA
0BFh
TRISA
; Initialize PORTA by
; clearing output latches
; Alternate method to
; clear output data latches
; Select bank with ANCON1 register
; Configure A/D
; for digital inputs
; Select bank with TRISA register
; Value used to initialize
; data direction
; Set RA<7, 5:0> as inputs,
; RA<6> as output
and
INITIALIZING PORTA
 2010 Microchip Technology Inc.
OSC1/CLKI/RA7
normally