PIC18F86K22-I/PTRSL Microchip Technology, PIC18F86K22-I/PTRSL Datasheet - Page 209

• Manufacturer Part Number: PIC18F86K22-I/PTRSL
• Description: MCU PIC 64K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K22-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

16.0
The Timer3/5/7 timer/counter modules incorporate
these features:
• Software-selectable operation as a 16-bit timer or
• Readable and writable eight-bit registers (TMRxH
• Selectable clock source (internal or external) with
• Interrupt-on-overflow
• Module Reset on ECCP Special Event Trigger
Timer7 is unimplemented for devices with program
memory of 32 Kbytes (PIC18FX5K22).
 2010 Microchip Technology Inc.
counter
and TMRxL)
device clock or SOSC oscillator internal options
Note: Throughout this section, generic references
TIMER3/5/7 MODULES
are used for register and bit names that are the
same – except for an ‘x’ variable that indicates
the item’s association with the Timer3, Timer5
or Timer7 module. For example, the control
register is named TxCON and refers to
T3CON, T5CON and T7CON.
Preliminary
PIC18F87K22 FAMILY
A simplified block diagram of the Timer3/5/7 module is
shown in Figure 16-1.
The Timer3/5/7 module is controlled through the
TxCON register (Register 16-1). It also selects the
clock source options for the ECCP modules. (For more
information, see Section 20.1.1 “ECCP Module and
Timer Resources”.)
The F
ECCP capture/compare features. If the timer will be
used with the capture or compare features, always
select one of the other timer clocking options.
OSC
clock source should not be used with the
DS39960B-page 209