PIC18F86K22-I/PTRSL Microchip Technology, PIC18F86K22-I/PTRSL Datasheet - Page 217

• Manufacturer Part Number: PIC18F86K22-I/PTRSL
• Description: MCU PIC 64K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K22-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

16.5.4
When Timer3/5/7 Gate Single Pulse mode is enabled,
it is possible to capture a single pulse gate event.
Timer3/5/7 Gate Single Pulse mode is first enabled by
setting the TxGSPM bit (TxGCON<4>). Next, the
TxGGO/TxDONE bit (TxGCON<3>) must be set.
The Timer3/5/7 will be fully enabled on the next incre-
menting edge. On the next trailing edge of the pulse,
the TxGGO/TxDONE bit will automatically be cleared.
FIGURE 16-4:
 2010 Microchip Technology Inc.
Timer3/5/7
TMRxGIF
TMRxGE
TxGSPM
TxDONE
TxGPOL
TxGGO/
TxGVAL
TxG_IN
TxCKI
TIMER3/5/7 GATE SINGLE PULSE
MODE
TIMER3/5/7 GATE SINGLE PULSE MODE
Cleared by Software
N
Counting Enabled on
Rising Edge of TxG
Set by Software
Preliminary
N + 1
PIC18F87K22 FAMILY
No other gate events will be allowed to increment
Timer3/5/7 until the TxGGO/TxDONE bit is once again
set in software.
Clearing the TxGSPM bit also will clear the TxGGO/
TxDONE bit. (For timing details, see Figure 16-4.)
Simultaneously enabling the Toggle mode and the
Single Pulse mode will permit both sections to work
together. This allows the cycle times on the Timer3/5/7
gate source to be measured. (For timing details, see
Figure 16-5.)
Set by Hardware on
Falling Edge of TxGVAL
Cleared by Hardware on
Falling Edge of TxGVAL
N + 2
DS39960B-page 217
Cleared by
Software