PIC18F86K22-I/PTRSL Microchip Technology, PIC18F86K22-I/PTRSL Datasheet - Page 210

• Manufacturer Part Number: PIC18F86K22-I/PTRSL
• Description: MCU PIC 64K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K22-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F87K22 FAMILY
REGISTER 16-1:
DS39960B-page 210
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-4
bit 3
bit 2
bit 1
bit 0
Note 1:
TMRxCS1
R/W-0
The F
features.
TMRxCS<1:0>: Timerx Clock Source Select bits
10 = Timer1 clock source depends on the SOSCEN bit:
SOSCEN = 0:
External clock from the T1CKI pin (on the rising edge).
SOSCEN = 1:
Depending on the SOSCSEL fuses, either a crystal oscillator on the SOSCI/SOSCO pins or an external
clock from the SCLKI pin.
01 = Timerx clock source is system clock (F
00 = Timerx clock source is instruction clock (F
TxCKPS<1:0>: Timerx Input Clock Prescale Select bits
11 = 1:8 Prescale value
10 = 1:4 Prescale value
01 = 1:2 Prescale value
00 = 1:1 Prescale value
SOSCEN: SOSC Oscillator Enable bit
1 = SOSC/SCLKI enabled for Timerx (based on the SOSCSEL fuses)
0 = SOSC/SCLKI disabled for Timerx and TxCKI is enabled
TxSYNC: Timerx External Clock Input Synchronization Control bit
(Not usable if the device clock comes from Timer1/Timer3.)
When TMRxCS<1:0> = 10:
1 = Do not synchronize external clock input
0 = Synchronize external clock input
When TMRxCS<1:0> = 0x:
This bit is ignored; Timer3 uses the internal clock.
RD16: 16-Bit Read/Write Mode Enable bit
1 = Enables register read/write of Timerx in one 16-bit operation
0 = Enables register read/write of Timerx in two eight-bit operations
TMRxON: Timerx On bit
1 = Enables Timerx
0 = Stops Timerx
TMRxCS0
OSC
R/W-0
clock source should not be selected if the timer will be used with the ECCP capture/compare
TxCON: TIMERx CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
TxCKPS1
R/W-0
TxCKPS0
R/W-0
Preliminary
OSC
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
SOSCEN
OSC
R/W-0
)
(1)
/4)
TxSYNC
R/W-0
 2010 Microchip Technology Inc.
x = Bit is unknown
R/W-0
RD16
TMRxON
R/W-0
bit 0