PIC18F86K22-I/PTRSL Microchip Technology, PIC18F86K22-I/PTRSL Datasheet - Page 366

• Manufacturer Part Number: PIC18F86K22-I/PTRSL
• Description: MCU PIC 64K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K22-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F87K22 FAMILY
REGISTER 24-1:
DS39960B-page 366
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4-3
bit 2
bit 1-0
Note 1:
R/W-0
CON
2:
3:
The CMPxIF bit is automatically set any time this mode is selected and must be cleared by the application
after the initial configuration.
Comparators, 1 and 3, use C2INB as an input to the inverting terminal. Comparator 2 uses C2IND.
C1INC, C2INC and C2IND are all unavailable for 64-pin devices (PIC18F6XK22).
CON: Comparator Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
COE: Comparator Output Enable bit
1 = Comparator output is present on the CxOUT pin
0 = Comparator output is internal only
CPOL: Comparator Output Polarity Select bit
1 = Comparator output is inverted
0 = Comparator output is not inverted
EVPOL<1:0>: Interrupt Polarity Select bits
11 = Interrupt generation on any change of the output
10 = Interrupt generation only on high-to-low transition of the output
01 = Interrupt generation only on low-to-high transition of the output
00 = Interrupt generation is disabled
CREF: Comparator Reference Select bit (non-inverting input)
1 = Non-inverting input connects to internal CV
0 = Non-inverting input connects to CxINA pin
CCH<1:0>: Comparator Channel Select bits
11 = Inverting input of comparator connects to V
10 = Inverting input of comparator connects to C2INB or C2IND pin
01 = Inverting input of comparator connects to CxINC pin
00 = Inverting input of comparator connects to CxINB pin
R/W-0
COE
CMxCON: COMPARATOR CONTROL x REGISTER
W = Writable bit
‘1’ = Bit is set
R/W-0
CPOL
EVPOL1
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
EVPOL0
REF
R/W-0
BG
voltage
(1)
R/W-0
CREF
(2,3)
 2010 Microchip Technology Inc.
x = Bit is unknown
R/W-0
CCH1
R/W-0
CCH0
bit 0