PIC18F86K22-I/PTRSL Microchip Technology, PIC18F86K22-I/PTRSL Datasheet - Page 37

• Manufacturer Part Number: PIC18F86K22-I/PTRSL
• Description: MCU PIC 64K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K22-I/PTRSL

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.0
2.1
Getting started with the PIC18F87K22 family family of
8-bit microcontrollers requires attention to a minimal
set of device pin connections before proceeding with
development.
The following pins must always be connected:
• All V
• All AV
• MCLR pin
• ENVREG (if implemented) and V
These pins must also be connected if they are being
used in the end application:
• PGC/PGD pins used for In-Circuit Serial
• OSCI and OSCO pins when an external oscillator
Additionally, the following pins may be required:
• V
The minimum mandatory connections are shown in
Figure 2-1.
 2010 Microchip Technology Inc.
(see Section 2.2 “Power Supply Pins”)
not the analog device features are used
(see Section 2.2 “Power Supply Pins”)
(see Section 2.3 “Master Clear (MCLR) Pin”)
(see Section 2.4 “Voltage Regulator Pins
(ENVREG and V
Programming™ (ICSP™) and debugging purposes
(see Section 2.5 “ICSP Pins”)
source is used
(see Section 2.6 “External Oscillator Pins”)
reference for analog modules is implemented
Note:
REF
DD
+/V
DD
GUIDELINES FOR GETTING
STARTED WITH PIC18FXXKXX
MICROCONTROLLERS
Basic Connection Requirements
and V
REF
and AV
The AV
connected, regardless of whether any of
the analog modules are being used.
- pins are used when external voltage
SS
SS
pins
DD
CAP
pins, regardless of whether or
and AV
/V
DDCORE
SS
pins must always be
)”)
CAP
/V
DDCORE
pins
Preliminary
PIC18F87K22 FAMILY
FIGURE 2-1:
V
Key (all values are recommendations):
C1 through C6: 0.1 F, 20V ceramic
R1: 10 kΩ
R2: 100Ω to 470Ω
Note 1:
DD
C6
R1
C1
(2)
R2
2:
MCLR
See Section 2.4 “Voltage Regulator Pins
(ENVREG and V
explanation of ENVREG pin connections.
The example shown is for a PIC18F device
with five V
Other devices may have more or less pairs;
adjust the number of decoupling capacitors
appropriately.
V
V
SS
DD
C5
PIC18FXXKXX
RECOMMENDED
MINIMUM CONNECTIONS
(2)
DD
/V
SS
CAP
and AV
ENVREG
V
/V
CAP
DDCORE
C4
C2
/V
DD
DS39960B-page 37
DDCORE
(2)
(2)
/AV
V
V
DD
SS
)” for
SS
pairs.
(1)
(1)
C3
C7
(2)
(2)