MC812A4CPVE8 Freescale Semiconductor, MC812A4CPVE8 Datasheet - Page 142

• Manufacturer Part Number: MC812A4CPVE8
• Description: IC MCU 16BIT EEPROM 4K 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC812A4CPVE8

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 83
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: EEPROM
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: HC812A
• Core: HC12
• Data Bus Width: 16 bit
• Data Ram Size: 1 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 8 Channel
• Controller Family/series: 68HC12
• No. Of I/o's: 91
• Eeprom Memory Size: 4KB
• Ram Memory Size: 1KB
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Standard Timer Module
----------------------------------------------------------------------
;
; ----------------------------------------------------------------------
;
MAIN:
;
DONE:
;* -----------------------------------------------------------------
;*
;* -----------------------------------------------------------------
TIMERINIT:
;
;
;
;
;* ------------------------------
;*
;* ------------------------------
SQWAVE:
;* -------
CLEARFLG:
;* -------
;*
;*
WTFLG:
142
Subroutine TIMERINIT: Initialize Timer for Output Compare on OC2
To clear the C2F flag: 1) read TFLG1 when
C2F is set and then 2) write a logic "one" to C2F.
SUBROUTINE:
ORG
BSR
BSR
BRA
CLR
MOVB
MOVB
MOVB
MOVW
MOVB
RTS
LDAA
ORAA
STAA
BRCLR
LDD
ADDD
STD
BRA
RTS
END
MAIN PROGRAM
$7000
TIMERINIT
SQWAVE
DONE
TMSK1
#$02,TMSK2
#$10,TCTL2
#$04,TIOS
#$0400,TC2H
#$80,TSCR
TFLG1
#$04
TFLG1
TFLG1,#$04,WTFLG; Wait (Polling) for C2F Flag
TC2H
#$0400
TC2H
CLEARFLG
SQWAVE
MC68HC812A4 Data Sheet, Rev. 7
; 16K On-Board RAM, User code data area,
; start main program at $7000
; Subroutine used to initialize the timer:
; Output compare channel, no interrupts
; Subroutine to generate square wave
; Branch to itself, Convinient for Breakpoint
; Disable All Interrupts
; Disable overflow interrupt, disable pull-up
; resistor function with normal drive capability
; and free running counter, Prescaler = sys clock/4.
; Initialize OC2 to toggle on successful compare.
; Select Channel 2 to act as output compare.
; Load TC2 Reg with initial compare value.
; Enable Timer, Timer runs during wait state, and
; while in Background Mode, also clear flags
; normally.
; Return from Subroutine
; To clear OC2 Flag, first it must be read,
; then a "1" must be written to it
; Loads value of compare from TC2 Reg.
; Add hex value of 500us High Time
; Set-up next transition time in 500 us
; Continuously add 500 us, branch to CLEARFLAG
; return from Subroutine
; End of program
Freescale Semiconductor