PIC18LF27J53-I/ML Microchip Technology, PIC18LF27J53-I/ML Datasheet - Page 408

• Manufacturer Part Number: PIC18LF27J53-I/ML
• Description: IC PIC MCU 128KB FLASH 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF27J53-I/ML

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: QFN
• Supply Voltage Range: 1.8V To 3.6V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F47J53 FAMILY
REGISTER 24-1:
DS39964B-page 408
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4-3
bit 2
bit 1-0
Note 1:
R/W-0
CON
The CMxIF is automatically set any time this mode is selected and must be cleared by the application after
the initial configuration.
CON: Comparator Enable bit
1 = Comparator is enabled
0 = Comparator is disabled
COE: Comparator Output Enable bit
1 = Comparator output is present on the CxOUT pin (assigned in the PPS module)
0 = Comparator output is internal only
CPOL: Comparator Output Polarity Select bit
1 = Comparator output is inverted
0 = Comparator output is not inverted
EVPOL<1:0>: Interrupt Polarity Select bits
11 = Interrupt generation on any change of the output
10 = Interrupt generation only on high-to-low transition of the output
01 = Interrupt generation only on low-to-high transition of the output
00 = Interrupt generation is disabled
CREF: Comparator Reference Select bit (non-inverting input)
1 = Non-inverting input connects to the internal CV
0 = Non-inverting input connects to the CxINA pin
CCH<1:0>: Comparator Channel Select bits
11 = Inverting input of comparator connects to V
10 = Inverting input of comparator connects to the CxIND pin
01 = Inverting input of comparator connects to the CxINC pin
00 = Inverting input of comparator connects to the CxINB pin
R/W-0
COE
CMxCON: COMPARATOR CONTROL 1/2/3 REGISTER (1, ACCESS FD2h; 2, FD1h;
3, BANKED F25h)
W = Writable bit
‘1’ = Bit is set
R/W-0
CPOL
EVPOL1
R/W-1
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
EVPOL0
R/W-1
IRV
REF
(0.6V)
(1)
voltage
R/W-1
CREF
 2010 Microchip Technology Inc.
x = Bit is unknown
R/W-1
CCH1
R/W-1
CCH0
bit 0