EZ80F91NA050SC Zilog, EZ80F91NA050SC Datasheet - Page 141

• Manufacturer Part Number: EZ80F91NA050SC
• Description: IC ACCLAIM MCU 256KB 144-BGA
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F91NA050SC

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 144-LBGA
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 50 MHz
• Data Ram Size: 16 KB
• Number Of Programmable I/os: 32
• Number Of Timers: 16 Bit
• Operating Supply Voltage: 3 V to 3.6 V
• Mounting Style: SMD/SMT
• Height: 1.5 mm
• Length: 13 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Width: 13 mm
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 269-3251

PS019215-0910
Timer Control Register
The Timer x Control Register (see
enabling the timer, selecting the clock source, selecting the clock divider, selecting
between CONTINUOUS and SINGLEPASS modes, and enabling the auto-reload 
feature.
Table 54. Timer Control Register
TMR2_CTL = 006Fh, TMR3_CTL = 0074h)
Bit
Reset
CPU Access
Note: R = Read only; R/W = Read/Write.
Bit
Position
7
BRK_STOP
[6:5]
CLK_SEL
[4:3]
CLK_DIV
2
TIM_CONT
Value
0
1
00
01
10
11
00
01
10
11
0
1
Timer source is the system clock divided by the prescaler.
System clock divider = 4.
System clock divider = 16.
System clock divider = 64.
Description
The timer continues to operate during debug break points.
The timer stops operation and holds count value during debug
break points.
Timer source is the Real Time Clock Input.
Timer source is the Event Count (ECx) input—falling edge.
For Timer 1 this is EC0.
For Timer 2, this is EC1.
Timer source is the Event Count (ECx) input—rising edge.
For Timer 1 this is EC0.
For Timer 2, this is EC1.
System clock divider = 256.
The timer operates in SINGLE PASS mode. TIM_EN (bit 0) is
reset to 0 and counting stops when the end-of-count value is
reached.
The timer operates in CONTINUOUS mode. The timer reload
value is written to the counter when the end-of-count value is
reached.
R/W
7
0
R/W
Table
6
0
(TMR0_CTL = 0060h, TMR1_CTL = 0065h,
54) is used to control timer operations including
R/W
5
0
R/W
4
0
R/W
3
0
Programmable Reload Timers
Product Specification
R/W
2
0
eZ80F91 MCU
R/W
1
0
R/W
0
0
132