EZ80F91NA050SC Zilog, EZ80F91NA050SC Datasheet - Page 296

• Manufacturer Part Number: EZ80F91NA050SC
• Description: IC ACCLAIM MCU 256KB 144-BGA
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F91NA050SC

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 144-LBGA
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 50 MHz
• Data Ram Size: 16 KB
• Number Of Programmable I/os: 32
• Number Of Timers: 16 Bit
• Operating Supply Voltage: 3 V to 3.6 V
• Mounting Style: SMD/SMT
• Height: 1.5 mm
• Length: 13 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Width: 13 mm
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 269-3251

Ethernet Media Access Controller
PS019215-0910
Note:
MII Interface
The Ethernet Media Access Controller (EMAC) is a full-function 10/100 Mbps media
access control module with a Media-Independent Interface (MII). When communicating
with an external PHY device, the eZ80F91 MCU uses the MII to gain access to the
Ethernet network.
Figure 59
For additional information about the Ethernet protocol and using it with the eZ80F91
MCU, refer to the IEEE 802.3 specification, 1998 edition, Section 22. The eZ80F91 MCU
supports the IEEE 802.3 protocol with the following exception:

The eZ80F91 MCU does not support the Giga Media Independent Interface (GMII)
referred to in the following sections of the IEEE 802.3 1998 version: section 22.1.5, sec-
tion 22.2.4, section 22.2.4.1.2, section 22.2.4.1.5, and section 22.2.4.1.6.
The EMAC is used for many different applications, including network interface, ethernet
switching, and test equipment designs. The EMAC includes the following blocks:
•
•
RxCLK
TxCLK
Central clock and reset module (not shown in the block diagram).
Host memory interface and transmit/receiver arbiter.
MDIO
RxDV
RxER
TxER
TxEN
MDC
COL
CRS
RxD
TxD
displays the EMAC block diagram.
Figure 59. EMAC Block Diagram
RxD/CTRL
Accept
Reject
RxFIFO
TxFIFO
CTRL
RxD
RxDMA
TxDMA
Ethernet Media Access Controller

Product Specification
287