EZ80F91NA050SC Zilog, EZ80F91NA050SC Datasheet - Page 68

• Manufacturer Part Number: EZ80F91NA050SC
• Description: IC ACCLAIM MCU 256KB 144-BGA
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F91NA050SC

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 144-LBGA
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 50 MHz
• Data Ram Size: 16 KB
• Number Of Programmable I/os: 32
• Number Of Timers: 16 Bit
• Operating Supply Voltage: 3 V to 3.6 V
• Mounting Style: SMD/SMT
• Height: 1.5 mm
• Length: 13 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Width: 13 mm
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 269-3251

Table 13. Vectored Interrupt Operation
PS019215-0910
Memory
Mode
Z80
ADL Mode
Z80 Mode
®
Mode 0
ADL
Bit
1
0
boundary. Setting the LSB of the I register produces no effect on the interrupt vector
address.
0
MADL
Bit
0
1
Read the LSB of the interrupt vector placed on the internal vectored interrupt
bus, IVECT [8:0], by the interrupting peripheral.
IEF1
IEF2
The Starting Program Counter is effective {MBASE, PC[15:0]}.
Push the 2-byte return address PC[15:0] onto the ({MBASE,SPS}) stack.
The ADL mode bit remains cleared to 0.
The interrupt vector address is located at { MBASE, I[7:1], IVECT[8:0] }.
PC[23:0]
The interrupt service routine must end with RETI.
Read the LSB of the interrupt vector placed on the internal vectored interrupt
bus, IVECT [8:0], by the interrupting peripheral.
IEF1
IEF2
The Starting Program Counter is PC[23:0].
Push the 3-byte return address, PC[23:0], onto the SPL stack.
The ADL mode bit remains set to 1.
The interrupt vector address is located at { I[15:1], IVECT[8:0] }.
PC[23:0]
The interrupt service routine must end with RETI.
Read the LSB of the interrupt vector placed on the internal vectored interrupt
bus, IVECT[8:0], bus by the interrupting peripheral.
•
•
• The Starting Program Counter is effective {MBASE, PC[15:0]}.
• Push the 2-byte return address, PC[15:0], onto the SPL stack.
• Push a 00h byte onto the SPL stack to indicate an interrupt from Z80 mode
• Set the ADL mode bit to 1.
• The interrupt vector address is located at { I[15:1], IVECT[8:0] }.
• PC[23:0]
• The interrupt service routine must end with RETI.L
Operation
IEF1
IEF2
(because ADL = 0).






0
0
0
0


0
0

( { MBASE, I[7:1], IVECT[8:0] } ).
( { I[15:1], IVECT[8:0] } ).
( { I[15:1], IVECT[8:0] } )
.
Product Specification
Interrupt Controller
eZ80F91 MCU
59