EZ80F91NA050SC Zilog, EZ80F91NA050SC Datasheet - Page 334

• Manufacturer Part Number: EZ80F91NA050SC
• Description: IC ACCLAIM MCU 256KB 144-BGA
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F91NA050SC

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 144-LBGA
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 50 MHz
• Data Ram Size: 16 KB
• Number Of Programmable I/os: 32
• Number Of Timers: 16 Bit
• Operating Supply Voltage: 3 V to 3.6 V
• Mounting Style: SMD/SMT
• Height: 1.5 mm
• Length: 13 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Width: 13 mm
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 269-3251

Table 216. EMAC Interrupt Status Register
PS019215-0910
Bit
Reset
CPU Access
Note: R/W = Read/Write.
Bit
Position
7
TxFSMERR_STAT
6
MGTDONE_STAT
5
Rx_CF_STAT
4
Rx_PCF_STAT
3
Rx_DONE_STAT
2
Rx_OVR_STAT
Note:
EMAC Interrupt Status Register
When a Receive overrun occurs, all incoming packets are ignored until the
Rx_OVR_STAT status bit is cleared by software. Consequently, software controls when
the receiver is re-enabled after an overrun. Enable the Rx_OVR interrupt to detect overrun
conditions when they occur. Clear this condition when the Rx buffers are freed to avoid
additional overrun errors. See
Status bits are not self-clearing. Each status bit is cleared by writing a 1 into the selected
bit.
Value
1
0
1
0
1
0
1
0
1
0
1
0
R/W
7
0
Description
An internal error occurs in the EMAC Transmit path. The
Transmit path must be reset to reset this error condition.
Normal operation—no Transmit state machine errors.
The MII Management interrupt has completed a Read
(RSTAT or SCAN) or a Write (LDCTLD) access to the
PHY.
The MII Management interrupt does not occur.
Receive Control Frame interrupt (Receive Interrupt)
occurs.
Receive Control Frame interrupt does not occur.
Receive Pause Control Frame interrupt (Receive
Interrupt) occurs.
Disable Receive Pause Control Frame interrupt (Receive
Interrupt) does not occur.
Receive Done interrupt (Receive Interrupt) occurs.
Disable Receive Done interrupt (Receive Interrupt) does
not occur.
Receive Overrun interrupt (System Interrupt) occurs.
Receive Overrun interrupt (System Interrupt) does not
occur.
R/W
6
0
R/W
5
0
Table
(EMAC_ISTAT = 004Dh)
R/W
4
0
216.
R/W
3
0
R/W
2
0
R/W
Ethernet Media Access Controller
1
0
Product Specification
R/W
0
0
325