EZ80F91NA050SC Zilog, EZ80F91NA050SC Datasheet - Page 161

• Manufacturer Part Number: EZ80F91NA050SC
• Description: IC ACCLAIM MCU 256KB 144-BGA
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F91NA050SC

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 144-LBGA
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 50 MHz
• Data Ram Size: 16 KB
• Number Of Programmable I/os: 32
• Number Of Timers: 16 Bit
• Operating Supply Voltage: 3 V to 3.6 V
• Mounting Style: SMD/SMT
• Height: 1.5 mm
• Length: 13 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Width: 13 mm
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: No RoHS Version Available
• Other names: 269-3251

PS019215-0910
Multi-PWM Power-Trip Mode
When enabled, the Multi-PWM power-trip feature forces the enabled PWM outputs to a
predetermined state when an interrupt is generated from an external source via IC0, IC1,
IC2, or IC3. One or multiple external interrupt sources are enabled at any given time. If
multiple sources are enabled, any of the selected external sources trigger an interrupt.
Configuring the PWM_CTL3 register enables or disables interrupt sources. See
on page 156.
The possible interrupt sources for a Multi-PWM power-trip are:
•
•
•
•
When the power-trip is detected, TMR3_PWM_CTL3[PTD] is set to 1 to indicate 
detection of the power-trip. A value of 0 signifies that no power-trip is detected.
The PWMs are released only after a power-trip when TMR3_PWM_CTL3[PTD] is 
written back to 0 by software. As a result, you are allowed to check the conditions of the
motor being controlled before releasing the PWMs. The explicit release also prevents
noise glitches after a power-trip from causing an accidental exit or re-entry of the PWM
power-trip state.
The programmable power-trip states of the PWMs are globally grouped for the PWM out-
puts and the inverting PWM outputs. Upon detection of a power-trip, the PWM outputs
are forced to either a High state, a Low state, or high-impedance. The settings for the
power-trip states are made with power-trip control bits TMR3_PWM_CTL3[PT_LVL],
TMR3_PWM_CTL3[PT_LVL_N], and TMR3_PWM_CTL3[PT_TRI].
IC0—digital input
IC1—digital input
IC2—digital input
IC3—digital input
Programmable Reload Timers
Product Specification
eZ80F91 MCU
Table 75
152