IPR-PCI/MT32 Altera, IPR-PCI/MT32 Datasheet - Page 45

• Manufacturer Part Number: IPR-PCI/MT32
• Description: IP CORE Renewal Of IP-PCI/MT32
• Manufacturer: Altera
• Type: MegaCorer

Specifications of IPR-PCI/MT32

• Software Application: IP CORE, Interface And Protocols, PCI
• Supported Families: Arria GX, Arria II GX, Cyclone, Stratix
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Rohs Compliant: NA
• Function: PCI Compiler, Master/Target, 32 bit
• License: Renewal License
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Altera Corporation
January 2011
Simulation in the Quartus II Software
Altera provides Vector Waveform Files (.vwf) for each of the PCI
MegaCore functions to perform functional simulation in the Quartus II
software. The .vwf files are provided in the subdirectories at <path>\
pci_compiler\megawizard_flow\qexamples\<PCI MegaCore
function>\sim. For an explanation of the provided .vwf files, refer to
Quartus II Simulation Files” on page
This user guide explains the behavior and usage of the PCI MegaCore
functions for the most common PCI transactions. You can use the .vwf
files to further understand the local-side behavior of a PCI MegaCore
function for different PCI bus conditions. In addition, you can modify the
provided .vwf files to simulate other scenarios of interest.
1
To perform functional simulation in the Quartus II software, perform
these steps:
1.
2.
3.
4.
5.
Go to the <path>\pci_compiler\megawizard_flow\
qexamples\pci_mt64 directory.
Open the Quartus II project by double-clicking on pci_top.qpf.
1
Choose Generate Functional Simulation Netlist (Processing
menu).
The Quartus II software may issue several warning messages,
including messages indicating that one or more registers are stuck at
ground. These warning messages are due to parameter settings and
can be ignored.
After compilation has finished successfully, choose Simulator Tool
(Processing Menu).
In the Simulation mode list, select Functional.
This procedure demonstrates functional simulation in the
Quartus II software of a pci_mt64 MegaCore function
variation. You can also use this procedure for the pci_mt32,
pci_t32 and pci_t64 MegaCore functions.
PCI Compiler Version 10.1
This Quartus II project contains a PCI MegaCore function
variation with the parameter settings required to simulate
the included .vwf files successfully. For a description of the
parameter settings required to simulate the included .vwf
files, refer to
page
1–12.
“The Quartus II Simulation Files” on
1–12.
PCI Compiler User Guide
Getting Started
“The
1–11