PEB2256H-V12 Infineon Technologies, PEB2256H-V12 Datasheet - Page 370

no-image

PEB2256H-V12

Manufacturer Part Number
PEB2256H-V12
Description
IC INTERFACE LINE 3.3V 80-MQFP
Manufacturer
Infineon Technologies
Datasheet

Specifications of PEB2256H-V12

Applications
*
Interface
*
Voltage - Supply
*
Package / Case
80-SQFP
Mounting Type
Surface Mount
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
PEB2256H-V12
PEB2256H-V12IN

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PEB2256H-V12
Manufacturer:
Infineon Technologies
Quantity:
10 000
ELT
LOS1
Loop Code Register 1 (Read/Write)
Value after reset: 00
LCR1
EPRM
XPRBS
Data Sheet
EPRM
7
XPRBS
Enable Loop-Timed
0 =
1 =
Loss-of-Signal Recovery condition
0 =
1 =
Enable Pseudo-Random Binary Sequence Monitor
0 =
1 =
Transmit Pseudo-Random Binary Sequence
A one in this bit position enables transmission of a pseudo-random
binary sequence to the remote end. Depending on bit LLBP the PRBS
is generated according to 2
H
Transmit clock is generated from the clock supplied by MCLK
which is synchronized to the extracted receive route clock. In
this configuration the transmit elastic buffer has to be enabled.
Refer to register FMR5.XTM. For correct operation of loop
timed the remote loop (bit LIM1.RL = 0) must be inactive and bit
CMR1.DXSS must be cleared.
Normal operation
The LOS alarm is cleared if the predefined pulse-density
(register PCR) is detected during the time interval which is
defined by register PCD.
Additionally to the recovery condition described above a LOS
alarm is only cleared if the pulse-density is fulfilled and no more
than 15 contiguous zeros are detected during the recovery
interval (according to GR-499-CORE).
Pseudo-random binary sequence (PRBS) monitor is disabled.
PRBS is enabled. Setting this bit enables incrementing the bit
error counter BEC with each detected PRBS bit error. With any
change of state of the PRBS internal synchronization status an
interrupt ISR3.LLBSC is generated. The current status of the
PRBS synchronizer is indicated by bit FRS1.LLBAD.
LDC1
LDC0
370
LAC1
15
-1 or 2
LAC0
20
-1 (ITU-T O. 151).
FLLB
T1/J1 Registers
LLBP
FALC56 V1.2
0
PEB 2256
2002-08-27
(3B)

Related parts for PEB2256H-V12