R88M-WP10030S-WS1 Omron, R88M-WP10030S-WS1 Datasheet - Page 250

• Manufacturer Part Number: R88M-WP10030S-WS1
• Description: SERVO MOTOR 100W 100V
• Manufacturer: Omron

Specifications of R88M-WP10030S-WS1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: R88MWP10030SWS1

Operation
Note 1. The “
Note 2. In this manual, when Parameter Unit keys and front panel keys are shown together, the Pa-
Note 3. Press and hold the Up or Down Key to increment or decrement rapidly (auto-increment func-
Note 4. The function selected depends on the length of time you press and hold the DATA Key on the
4-3-2 Jog Operation
H Using the Jog Operation
D First Try 500 r/min.
4-12
System Check Mode jog
operation
• Jog operations rotate the Servomotor in a forward or reverse direction using the operation keys.
• For safety’s sake, only use the jog operation when the Servomotor is unloaded (i.e., when the shaft is
• Use the jog operation when the power to the Host Controller is turned OFF, or the Host Controller is
• The jog operation is System Check Mode function code Fn002.
• You can use the keys to turn the Servomotor ON or OFF, or rotate the Servomotor forward and re-
• The default jog operation speed is 500 r/min. You can change the speed using user parameter num-
not connected to the mechanical system). Also, to prevent the Servomotor rotating sideways, fasten
the Servomotor mounting surface firmly to the machinery.
not connected.
verse.
ber Pn304 (jog speed).
can be changed flash).
rameter Unit key is given first, and the front panel key is given in parentheses as follows:
(
tion).
Servo Driver front panel (functions as the Left Key when held for less than 1 s, and as the
DATA Key when held for 1 s or longer).
).
” mark beneath a display example indicates the numbers are flashing. (Digits that
1 s min.
1 s min.
Release Key
JoG displayed. (Servo OFF.)
JoG displayed. (Servo ON.)
Forward/reverse rotation
operation
Rotate the Servomotor while
holding down the Key.
Servo ON/OFF operation
Chapter 4