MC9S12E256VPVE Freescale Semiconductor, MC9S12E256VPVE Datasheet - Page 411

• Manufacturer Part Number: MC9S12E256VPVE
• Description: IC MCU 256K FLASH 25MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12E256VPVE

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 112-LQFP
• Processor Series: S12E
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/SCI/SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 92
• Number Of Timers: 12
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• On-chip Dac: 2-ch x 8-bit
• For Use With: M68EVB912E128 - BOARD EVAL FOR MC9S12E128/64
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Chapter 13
Timer Module (TIM16B4CV1)
13.1
The basic timer consists of a 16-bit, software-programmable counter driven by a seven-stage
programmable prescaler.
This timer can be used for many purposes, including input waveform measurements while simultaneously
generating an output waveform. Pulse widths can vary from microseconds to many seconds.
This timer contains 4 complete input capture/output compare channels IOC[7:4] and one pulse
accumulator. The input capture function is used to detect a selected transition edge and record the time.
The output compare function is used for generating output signals or for timer software delays. The 16-bit
pulse accumulator is used to operate as a simple event counter or a gated time accumulator. The pulse
accumulator shares timer channel 7 when in event mode.
A full access for the counter registers or the input capture/output compare registers should take place in
one clock cycle. Accessing high byte and low byte separately for all of these registers may not yield the
same result as accessing them in one word.
13.1.1
The TIM16B4CV1 includes these distinctive features:
13.1.2
Stop:
Freeze:
Wait:
Normal:
Freescale Semiconductor
•
•
•
•
Four input capture/output compare channels
Clock prescaling
16-bit counter
16-bit pulse accumulator
Introduction
Features
Modes of Operation
Timer is off because clocks are stopped.
Timer counter keep on running, unless TSFRZ in TSCR (0x0006) is set to 1.
Counters keep on running, unless TSWAI in TSCR (0x0006) is set to 1.
Timer counter keep on running, unless TEN in TSCR (0x0006) is cleared to 0.
MC9S12E256 Data Sheet, Rev. 1.08
411