UPD78F9502MA-CAC-A NEC, UPD78F9502MA-CAC-A Datasheet - Page 217

• Manufacturer Part Number: UPD78F9502MA-CAC-A
• Description: 8BIT MCU, 4K FLASH, 128B RAM, SMD
• Manufacturer: NEC

Specifications of UPD78F9502MA-CAC-A

• Controller Family/series: UPD78F
• No. Of I/o's: 8
• Ram Memory Size: 128Byte
• Cpu Speed: 10MHz
• No. Of Timers: 2
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 4KB
• Oscillator Type: External, Internal

A.5 Debugging Tools (Hardware)
A.5.1 When using in-circuit emulator QB-78K0SKX1
A.5.2 When using in-circuit emulator QB-MINI2
Remark
Remark
QB-78K0SKX1
In-circuit emulator
QB-50-EP-01T
Emulation probe
QB-10MA-EA-01T
Exchange adapter
QB-10MA-NQ-01T
Target connector
Specifications of pin header on
target system
QB-MINI2
On-chip debug emulator with
programming function
Specifications of pin header on
target system
The QB-78K0SKX1 is provided with a AC adapter, a USB interface cable, a target cable, the integrated
debugger ID78K0S-QB, and the on-chip debug emulator with programming function QB-MINI2.
The QB-MINI2 is provided with a USB interface cable, and a target cable. In addition, the integrated
debugger (including ID78K0S-QB) is used as control software. The integrated debugger is available on the
following website.
The QB-78K0SKX1 is also provided with an emulation probe, an exchange adapter, and a target
connector depending on the ordering code.
http://www.necel.com/micro/ods/eng/
16-pin general-purpose connector (2.54 mm pitch)
This in-circuit emulator serves to debug hardware and software when developing application
systems using the 78K0S/Kx1+. It supports the integrated debugger (ID78K0S-QB). It is
connected to the included AC adapter, target cable, and host machine via a USB interface
cable.
This emulation probe is a flexible type and is used to connect the in-circuit emulator and target
system.
This exchange adapter is used to perform pin conversion from the in-circuit emulator to target
connector.
This target connector is used to mount on the target system.
0.635 mm
This is an on-chip debug emulator which serves to debug hardware and software when
developing application systems using all flash microcontrollers (including the 78K0S/Kx1+). It
is available also as a flash memory programmer dedicated to microcontrollers incorporating a
flash memory.
APPENDIX A DEVELOPMENT TOOLS
Preliminary User’s Manual U18681EJ1V0UD
0.635 mm (height: 6 mm)
217