ATmega1284PR231 Atmel Corporation, ATmega1284PR231 Datasheet - Page 179

• Manufacturer Part Number: ATmega1284PR231
• Manufacturer: Atmel Corporation

Specifications of ATmega1284PR231

• Flash (kbytes): 128 Kbytes
• Max. Operating Frequency: 20 MHz
• Max I/o Pins: 32
• Spi: 3
• Twi (i2c): 1
• Uart: 2
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Crypto Engine: AES
• Sram (kbytes): 16
• Eeprom (bytes): 4096
• Operating Voltage (vcc): 1.8 to 3.6
• Timers: 3
• Frequency Band: 2.4 GHz
• Max Data Rate (mb/s): 2
• Antenna Diversity: Yes
• External Pa Control: Yes
• Power Output (dbm): 3
• Receiver Sensitivity (dbm): -101
• Receive Current Consumption (ma): 13.2
• Transmit Current Consumption (ma): 14.4
• Link Budget (dbm): 104

21.3
21.4
21.4.1
8111C–MCU Wireless–09/09
Typical Characteristics
Active Supply Current
P_ON and TRX_OFF states
The following charts showing each a typical behavior of the AT86RF231. These figures are not
tested during manufacturing for all supply voltages and all temperatures. All power consumption
measurements are performed with pin 17 (CLKM) disabled, unless otherwise stated.
Power consumption for the microcontroller required to program the radio transceiver is not
included in the measurement results.
The power consumption in SLEEP state mode is independent from CLKM master clock rate
selection.
The current consumption is a function of several factors such as: operating voltage, operating
frequency, loading of I/O pins, switching rate of I/O pins, and ambient temperature. The dominat-
ing factors are operating voltage and ambient temperature.
If possible the measurement results are not affected by current drawn from I/O pins. Register,
SRAM or Frame Buffer read or write accesses are not performed during current consumption
measurements.
Figure 21-1. Current Consumption in P_ON State
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
1.6
1.8
2.0
2.2
2.4
EVDD [V]
2.6
2.8
3.0
3.2
3.4
AT86RF231
3.6
3.8
125 °C
-40 °C
85 °C
25 °C
0 °C
179