D13008VXI25V Renesas Electronics America, D13008VXI25V Datasheet - Page 106

• Manufacturer Part Number: D13008VXI25V
• Description: MCU 3V 0K I-TEMP PB-FREE 100-TQF
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13008VXI25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

3. MCU Operating Modes
3.4
3.4.1
Ports 1, 2, and 5 function as address pins A
address space. The initial bus mode after a reset is 8 bits, with 8-bit access to all areas. If at least
one area is designated for 16-bit access in ABWCR, the bus mode switches to 16 bits.
3.4.2
Ports 1, 2, and 5 function as address pins A
address space. The initial bus mode after a reset is 16 bits, with 16-bit access to all areas. If all
areas are designated for 8-bit access in ABWCR, the bus mode switches to 8 bits.
3.4.3
Ports 1, 2, and 5 and part of port A function as address pins A
maximum 16-Mbyte address space. The initial bus mode after a reset is 8 bits, with 8-bit access to
all areas. If at least one area is designated for 16-bit access in ABWCR, the bus mode switches to
16 bits. A
(BRCR). (In this mode A
3.4.4
Ports 1, 2, and 5 and part of port A function as address pins A
maximum 16-Mbyte address space. The initial bus mode after a reset is 16 bits, with 16-bit access
to all areas. If all areas are designated for 8-bit access in ABWCR, the bus mode switches to
8 bits. A
used for address output.)
3.4.5
These modes cannot be used in the H8/3008. Pin settings must not be made for these modes.
Rev.4.00 Aug. 20, 2007 Page 60 of 638
REJ09B0395-0400
23
23
Operating Mode Descriptions
Mode 1
Mode 2
Mode 3
Mode 4
Modes 5 to 7
to A
to A
21
21
are valid when 0 is written in bits 7 to 5 of BRCR. (In this mode A
are valid when 0 is written in bits 7 to 5 of the bus release control register
20
is always used for address output.)
19
19
to A
to A
0
0
, permitting access to a maximum 1-Mbyte
, permitting access to a maximum 1-Mbyte
23
23
to A
to A
0
0
, permitting access to a
, permitting access to a
20
is always