D13008VXI25V Renesas Electronics America, D13008VXI25V Datasheet - Page 234

• Manufacturer Part Number: D13008VXI25V
• Description: MCU 3V 0K I-TEMP PB-FREE 100-TQF
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13008VXI25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

8. 16-Bit Timer
Counting
Direction
TCLKA pin
TCLKB pin
In phase counting mode, external clock edge selection by bits CKEG1 and CKEG0 in 16TCR2
and counter clock selection by bits TPSC2 to TPSC0 are invalid, and the above phase counting
mode operations take precedence.
The counter clearing condition selected by the CCLR1 and CCLR0 bits in 16TCR2 and the
compare match/input capture settings and interrupt functions of TIOR2, TISRA, TISRB, TISRC
remain effective in phase counting mode.
Bit 5—Flag Direction (FDIR): Designates the setting condition for the OVF flag in TISRC. The
FDIR designation is valid in all modes in channel 2.
Bit 5
FDIR
0
1
Bits 4 and 3—Reserved: These bits cannot be modified and are always read as 1.
Bit 2—PWM Mode 2 (PWM2): Selects whether channel 2 operates normally or in PWM mode.
Bit 2
PWM2
0
1
When bit PWM2 is set to 1 to select PWM mode, pin TIOCA
output goes to 1 at compare match with GRA2, and to 0 at compare match with GRB2.
Bit 1—PWM Mode 1 (PWM1): Selects whether channel 1 operates normally or in PWM mode.
Bit 1
PWM1
0
1
Rev.4.00 Aug. 20, 2007 Page 188 of 638
REJ09B0395-0400
Description
OVF is set to 1 in TISRC when 16TCNT2 overflows or underflows
OVF is set to 1 in TISRC when 16TCNT2 overflows
Description
Channel 2 operates normally
Channel 2 operates in PWM mode
Description
Channel 1 operates normally
Channel 1 operates in PWM mode
Down-Counting
↑
Low
High
↑
↓
High
Low
↓
Up-Counting
Low
↑
2
becomes a PWM output pin. The
↑
High
High
↓
(Initial value)
(Initial value)
(Initial value)
↓
Low