D13008VXI25V Renesas Electronics America, D13008VXI25V Datasheet - Page 134

• Manufacturer Part Number: D13008VXI25V
• Description: MCU 3V 0K I-TEMP PB-FREE 100-TQF
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13008VXI25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

5. Interrupt Controller
Figure 5.3 shows the timing of the setting of the interrupt flags (IRQnF).
Interrupts IRQ
whether the corresponding pin is set for input or output. When using a pin for external interrupt
input, clear its DDR bit to 0 and do not use the pin for chip select output, SCI input/output, or A/D
external trigger input.
5.3.2
Twenty-Seven internal interrupts are requested from the on-chip supporting modules.
• Each on-chip supporting module has status flags for indicating interrupt status, and enable bits
• Interrupt priority levels can be assigned in IPRA and IPRB.
5.3.3
Table 5.3 lists the interrupt exception handling sources, their vector addresses, and their default
priority order. In the default priority order, smaller vector numbers have higher priority. The
priority of interrupts other than NMI can be changed in IPRA and IPRB. The priority order after a
reset is the default order shown in table 5.3.
Rev.4.00 Aug. 20, 2007 Page 88 of 638
REJ09B0395-0400
for enabling or disabling interrupts.
Note: n = 5 to 0
Internal Interrupts
Interrupt Exception Handling Vector Table
φ
IRQn
input pin
IRQnF
0
to IRQ
5
have vector numbers 12 to 17. These interrupts are detected regardless of
Figure 5.3 Timing of Setting of IRQnF