D13008VXI25V Renesas Electronics America, D13008VXI25V Datasheet - Page 435

• Manufacturer Part Number: D13008VXI25V
• Description: MCU 3V 0K I-TEMP PB-FREE 100-TQF
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of D13008VXI25V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bits 3 to 0: These bits operate as in normal serial communication. For details see section 12.2.7,
Serial Status Register (SSR). The setting conditions for transmit end (TEND), however, are
modified as follows.
Bit 2
TEND
0
1
Note: An etu (elementary time unit) is the time needed to transmit one bit.
13.2.3
The function of SMR bit 7 is modified in smart card interface mode. This change also causes a
modification to the function of bits 1 and 0 in the serial control register (SCR).
Bit 7—GSM Mode (GM): With the normal smart card interface, this bit is cleared to 0. Setting
this bit to 1 selects GSM mode, an additional mode for controlling the timing for setting the
TEND flag that indicates completion of transmission, and the type of clock output used. The
details of the additional clock output control mode are specified by the CKE1 and CKE0 bits in
the serial control register (SCR).
Bit
Initial value
Read/Write
Serial Mode Register (SMR)
Description
Transmission is in progress
[Clearing condition]
Software reads TDRE while it is set to 1, then writes 0 in the TDRE flag.
End of transmission
[Setting conditions]
•
•
•
The chip is reset or enters standby mode.
The TE bit and FER/ERS bit are both cleared to 0 in SCR.
TDRE is 1 and FER/ERS is 0 at a time 2.5 etu after the last bit of a 1-byte serial
character is transmitted (normal transmission).
R/W
GM
7
0
CHR
R/W
6
0
R/W
PE
5
0
R/W
O/E
4
0
Rev.4.00 Aug. 20, 2007 Page 389 of 638
STOP
R/W
3
0
R/W
MP
2
0
13. Smart Card Interface
CKS1
R/W
REJ09B0395-0400
1
0
(Initial value)
CKS0
R/W
0
0