MC9S08JM32CLD Freescale Semiconductor, MC9S08JM32CLD Datasheet - Page 318

• Manufacturer Part Number: MC9S08JM32CLD
• Description: IC MCU 8BIT 32K FLASH 44-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08JM32CLD

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SCI, SPI, USB
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-LQFP
• Processor Series: S08JM
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMOJM, DEMOJMSKT, DEMOFLEXISJMSD, DEMO9S08JM16
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Universal Serial Bus Device Controller (S08USBV1)
The BDT is composed of buffer descriptors (BD) which are used to define and control the actual buffers
in the USB RAM space. BDs always occur as a 3-bytes block. See
Endpoint 0 IN start from USB RAM offset 0x00.
The format for the buffer descriptor is shown in
318
BDTKPID[3:0]
0x00
0x01
0x02
BDTSTALL
DATA0/1
•
•
OWN
Offset
Field
DTS
How much data was transmitted or received.
Where the buffer resides in buffer memory
W
W
W
R
R
R
OWN — This OWN bit determines who currently owns the buffer. The USB SIE generally writes a 0 to this bit
when it has completed a token. The USB module ignores all other fields in the BD when OWN=0. Once the BD
has been assigned to the USB module (OWN=1), the MCU must not change it in any way. This byte of the BD
must always be the last byte the MCU (firmware) updates when it initializes a BD. Although the hardware will
not block the MCU from accessing the BD while owned by the USB SIE, doing so may cause undefined
behavior and is generally not recommended.
0 The MCU has exclusive access to the entire BD
1 The USB module has exclusive access to the BD
Data Toggle — This bit defines if a DATA0 field (DATA0/1=0) or a DATA1 (DATA0/1=1) field was transmitted or
received. It is unchanged by the USB module.
0 Data 0 packet
1 Data 1 packet
The current token PID is written back to the BD by the USB module when a transfer completes. The values
written back are the token PID values from the USB specification: 0x1 for an OUT token, 0x9 for and IN token
or 0xd for a SETUP token.
Data Toggle Synchronization— This bit enables data toggle synchronization.
0 No data toggle synchronization is performed.
1 Data toggle synchronization is performed.
BDT Stall — Setting this bit will cause the USB module to issue a STALL handshake if a token is received by
the SIE that would use the BDT in this location. The BDT is not consumed by the SIE (the OWN bit remains
and the rest of the BD is unchanged) when the BDTSTALL bit is set.
0 BDT stall is disabled
1 USB will issue a STALL handshake if a token is received by the SIE that would use the BDT in this location
OWN
7
DATA0/1
6
Table 17-22. Buffer Descriptor Table Fields
Figure 17-19. Buffer Descriptor Example
MC9S08JM60 Series Data Sheet, Rev. 3
BDTKPID[3] BDTKPID[3] BDTKPID[1] BDTKPID[0]
5
0
EPADR[9:4]
Table
4
0
Description
17-22.
BC[7:0]
DTS
3
Figure 17-19
BDTSTALL
2
for the BD example of
Freescale Semiconductor
1
0
0
0