MC9S08JM32CLD Freescale Semiconductor, MC9S08JM32CLD Datasheet - Page 325

• Manufacturer Part Number: MC9S08JM32CLD
• Description: IC MCU 8BIT 32K FLASH 44-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08JM32CLD

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SCI, SPI, USB
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-LQFP
• Processor Series: S08JM
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMOJM, DEMOJMSKT, DEMOFLEXISJMSD, DEMO9S08JM16
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.4.8
Interrupts from the INTSTAT register signify events which occur during normal operation
frame tokens (TOKSOF), packet completion (TOKDNE), USB bus reset (USBRST), endpoint errors
(ERROR), suspend and resume (SLEEP and RESUME), and endpoint stalled (STALL).
The ERRSTAT interrupts carry information about specific types of errors, which is needed on an
application specific basis. Using ERRSTAT, an application can determine exactly why a packet transfer
failed
Both registers are maskable via the INTENB and ERRENB registers. The INTSTAT and ERRSTAT are
used to signal interrupts in a two-level structure. Unmasked interrupts from the ERRSTAT register are
reported in the INTSTAT register.
Note that the interrupt registers work in concert with the STAT register. On receipt of an INTSTAT
interrupt, software can check the STAT register and determine which BDT entry was affected by the
transaction.
Freescale Semiconductor
•
•
•
•
—
USB transceiver disabled
USBDP pullup disabled
Endpoints disabled
USB address register set to zero
due to CRC error, PID check error and so on.
Interrupts
MC9S08JM60 Series Data Sheet, Rev. 3
Universal Serial Bus Device Controller (S08USBV1)
—
USB start of
325