MC9S08JM32CLD Freescale Semiconductor, MC9S08JM32CLD Datasheet - Page 32

• Manufacturer Part Number: MC9S08JM32CLD
• Description: IC MCU 8BIT 32K FLASH 44-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS08r

Specifications of MC9S08JM32CLD

• Core Processor: HCS08
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SCI, SPI, USB
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-LQFP
• Processor Series: S08JM
• Core: HCS08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWS08
• Development Tools By Supplier: DEMOJM, DEMOJMSKT, DEMOFLEXISJMSD, DEMO9S08JM16
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Chapter 2 Pins and Connections
2.3.7
The USBDP (D+) and USBDN (D–) pins are the analog input/output lines to/from full-speed internal USB
transciever. An optional internal pullup resistor for the USBDP pin, R
2.3.8
The MC9S08JM60 series of MCUs support up to 51 general-purpose I/O pins, which are shared with
on-chip peripheral functions (timers, serial I/O, ADC, keyboard interrupts, etc.).
When a port pin is configured as a general-purpose output or a peripheral uses the port pin as an output,
software can select one of two drive strengths and enable or disable slew rate control. When a port pin is
configured as a general-purpose input or a peripheral uses the port pin as an input, software can enable a
pullup device.
For information about controlling these pins as general-purpose I/O pins, see the
Input/Output.”
appropriate module chapter.
Immediately after reset, all pins are configured as high-impedance general-purpose inputs with internal
pullup devices disabled.
32
USB Data Pins (USBDP, USBDN)
General-Purpose I/O and Peripheral Ports
For information about how and when on-chip peripheral systems use these pins, see the
MC9S08JM60 Series Data Sheet, Rev. 3
PUDP
, is available.
Chapter 6, “Parallel
Freescale Semiconductor