MC9S12NE64CPV Freescale Semiconductor, MC9S12NE64CPV Datasheet - Page 21

• Manufacturer Part Number: MC9S12NE64CPV
• Description: IC MCU 25MHZ ETHERNT/PHY 112LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12NE64CPV

• Mfg Application Notes: MC9S12NE64 Integrated Ethernet Controller Implementing an Ethernet Interface with the MC9S12NE64 Web Server Development with MC9S12NE64 and Open TCP
• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.375 V ~ 3.465 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 16 bit
• Operating Supply Voltage: - 0.3 V to + 3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 65 C
• On-chip Adc: 10 bit
• For Use With: EVB9S12NE64E - BOARD EVAL FOR 9S12NE64DEMO9S12NE64E - DEMO BOARD FOR 9S12NE64
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

1.1.2
Freescale Semiconductor
•
•
•
•
•
•
•
•
1.MEBI is available only in the 112-pin package and specified at a maximum speed of 16 MHz. If using MEBI from
2.No security feature is absolutely secure. However, Freescale Semiconductor’s strategy is to make reading or copying
2.5 MHz to 16 MHz, only 10BASE-T communication is available.
the FLASH difficult for unauthorized users.
— Clock monitor
— Pierce oscillator
— Phase-locked loop clock frequency multiplier
— Limp home mode in absence of external clock
— 25-MHz crystal oscillator reference clock
Operating frequency
— 50 MHz equivalent to 25 MHz bus speed for single chip
— 32 MHz equivalent to 16 MHz bus speed in expanded bus modes
Internal 2.5-V regulator
— Supports an input voltage range from 3.3 V ± 5%
— Low-power mode capability
— Includes low-voltage reset (LVR) circuitry
80-pin TQFP-EP or 112-pin LQFP package
— Up to 70 I/O pins with 3.3 V input and drive capability (112-pin package)
— Up to two dedicated 3.3 V input only lines (IRQ, XIRQ)
Development support
— Single-wire background debug™ mode (BDM)
— On-chip hardware breakpoints
— Enhanced DBG debug features
Normal modes
— Normal single-chip mode
— Normal expanded wide mode
— Normal expanded narrow mode
— Emulation expanded wide mode
— Emulation expanded narrow mode
Special operating modes
— Special single-chip mode with active background debug mode
Each of the above modes of operation can be configured for three low-power submodes
— Stop mode
— Pseudo stop mode
— Wait mode
Secure operation, preventing the unauthorized read and write of the memory contents
Modes of Operation
MC9S12NE64 Data Sheet, Rev 1.0
1
1
1
1
2
Introduction
21