PEF20550HV2.1XT Infineon Technologies, PEF20550HV2.1XT Datasheet - Page 303

• Manufacturer Part Number: PEF20550HV2.1XT
• Manufacturer: Infineon Technologies

Specifications of PEF20550HV2.1XT

• Lead Free Status / Rohs Status: Compliant

W:MAAR
W:MACR
W:MADR
W:MAAR
W:MACR
The above programming sequence can for example be performed during the
initialization phase of the ELIC. At this stage the CFI is not operational (OMDR = 80
i.e. the values received at the CFI are ignored.
not initiate a definite change, the values of two consecutive sampling points are
compared with the current old stable value. The stable value is then only updated if both
new values are identical and differ from the old stored value. The stable value can be
read from the odd CM data field location. Each change in the stable value is furthermore
indicated by an ISTA_E:SFI interrupt and the address of the corresponding odd CM
location is stored in the CIFIFO. Since the MSB of the CIFIFO is set to 1 for a valid entry
(SBV = 1), the value read from the CIFIFO can directly be copied to MAAR in order to
read the upstream CM data field, which also requires an MSB set to 1 (U/D = 1).
Note: The sampling interval is selected in the TIMR register (refer to chapter 5.5.2.1).
Examples
In CFI mode 0 the upstream timeslots 6 and 7 of port 2 shall be initialized as MF and CS
channels, 6 bit signaling scheme, the expected value from the codec after power up shall
be ‘011101’:
W:MADR
Semiconductor Group
If the sampling interval is set to 125 s (TIMR:SSR = 1), it is not necessary to start
the timer to operate the change detection logic. If, however, the last look period is
determined by TIMR:TVAL6 … 0 (TIMR:SSR = 0) it is required to start the timer
(CMDR:ST = 1) to operate the change detection logic and to generate SFI
interrupts.
= 0111 0111
= 1001 1100
= 0111 1010
= 0111 0111
= 1001 1101
= 0111 1010
B
B
B
B
B
B
; expected actual value ‘011101’
; upstream, port 2, timeslot 6
; write CM code + data fields, CM code ‘1010’
; expected stable value ‘011101’
; upstream, port 2, timeslot 7
; write CM code + data fields, CM code ‘1010’
303
Application Hints
PEB 20550
PEF 20550
01.96
H
),