MPC8572DS Freescale Semiconductor, MPC8572DS Datasheet - Page 133

• Manufacturer Part Number: MPC8572DS
• Description: KIT MPU POWERQUICC III
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC III™r
• Type: MPUr

Specifications of MPC8572DS

• Contents: Board
• Data Rate: 10 Mbps to 100 Mbps
• Memory Type: Flash, DDR, DDR2, DDR3, SDRAM
• Interface Type: I2C, Ethernet
• Operating Voltage: 3.3 V
• Data Bus Width: 32 bit
• Product: Development Tools
• Silicon Manufacturer: Freescale
• Core Architecture: Power Architecture
• Core Sub-architecture: PowerQUICC
• Silicon Core Number: MPC85xx
• Silicon Family Name: PowerQUICC III
• Rohs Compliant: Yes
• For Use With/related Products: MPC8572E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The following pins must be connected to XGND_SRDS2:
The POR configuration pin cfg_srds_sgmii_en on UART_RTS[1] can be used to power down SerDes 2
block for power saving. Note that both SVDD_SRDS2 and XVDD_SRDS2 must remain powered.
21.10.4 SerDes 2 Interface (SGMII) Partly Unused
If only part of the high speed SerDes 2 interface (SGMII) pins are used, the remaining high-speed serial
I/O pins should be terminated as described in this section.
The following pins must be left unconnected (float):
The following pins must be connected to XGND_SRDS2:
Freescale Semiconductor
•
•
•
•
•
•
•
•
•
•
•
•
SD2_TX[3:0]
SD2_TX[3:0]
Reserved pins: AF26, AF27
SD2_RX[3:0]
SD2_RX[3:0]
SD2_REF_CLK
SD2_REF_CLK
SD2_TX[3:0]
SD2_TX[3:0]
Reserved pins: AF26, AF27
SD2_RX[3:0]
SD2_RX[3:0]
MPC8572E PowerQUICC III Integrated Processor Hardware Specifications, Rev. 5
System Design Information
133