R5F212D8SNFP#U0 Renesas Electronics America, R5F212D8SNFP#U0 Datasheet - Page 201

• Manufacturer Part Number: R5F212D8SNFP#U0
• Description: IC R8C/2D MCU FLASH 64KB 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/2Dr

Specifications of R5F212D8SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 71
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 80-LQFP
• For Use With: R0K5212D8S001BE - KIT STARTER FOR R8C/2DR0K5212D8S000BE - KIT DEV FOR R8C/2D
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/2C Group, R8C/2D Group
Rev.2.00
REJ09B0339-0200
Figure 14.13
Timer RB One-Shot Control Register
Timer RB Control Register
b7 b6 b5 b4 b3 b2
NOTES:
b7 b6 b5 b4 b3 b2
NOTES:
1.
2.
1.
2.
3. Indicates that count operation is in progress in timer mode or programmable w aveform mode. In programmable one-
When 1 is set to the TSTOP bit in the TRBCR register, the TOSSTF bit is set to 0.
This register is enabled w hen bits TMOD1 to TMOD0 in the TRBMR register is set to 10b (programmable one-shot
generation mode) or 11b (programmable w ait one-shot generation mode).
Refer to 14.2.5 Notes on Tim er RB.
When the TSTOP bit is set to 1, registers TRBPRE, TRBSC, TRBPR, and bits TSTART and TCSTF, and the TOSSTF bit
in the TRBOCR register are set to values after a reset.
shot generation mode or programmable w ait one-shot generation mode, indicates that a one-shot pulse trigger has
been acknow ledged.
Dec 05, 2007
b1 b0
Registers TRBCR and TRBOCR
b1 b0
Bit Symbol
Bit Symbol
TRBOCR
TOSSTF
TSTART
(b7-b3)
(b7-b3)
Symbol
TOSST
TOSSP
Symbol
TRBCR
TSTOP
TCSTF
—
Page 178 of 585
—
Timer RB one-shot start bit
Timer RB one-shot stop bit
Timer RB one-shot status
flag
Nothing is assigned. If necessary, set to 0.
When read, the content is 0.
Timer RB count start bit
Timer RB count status flag
Timer RB count forcible stop
bit
Nothing is assigned. If necessary, set to 0.
When read, the content is 0.
(1, 2)
(1)
(2)
Address
Bit Name
Address
Bit Name
0109h
0108h
(1)
(1)
When this bit is set to 1, one-shot trigger
generated. When read, its content is 0.
When this bit is set to 1, counting of one-shot
pulses (including programmable w ait one-shot
pulses) stops. When read, its content is 0.
0 : One-shot stopped
1 : One-shot operating (Including w ait period)
0 : Count stops
1 : Count starts
0 : Count stops
1 : During count
When this bit is set to 1, the count is forcibly
stopped. When read, its content is 0.
(3)
After Reset
After Reset
Function
Function
00h
00h
14. Timers
RW
RW
RW
RW
RW
RW
RO
RO
—
—