R5F212D8SNFP#U0 Renesas Electronics America, R5F212D8SNFP#U0 Datasheet - Page 441

• Manufacturer Part Number: R5F212D8SNFP#U0
• Description: IC R8C/2D MCU FLASH 64KB 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/2Dr

Specifications of R5F212D8SNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 71
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 80-LQFP
• For Use With: R0K5212D8S001BE - KIT STARTER FOR R8C/2DR0K5212D8S000BE - KIT DEV FOR R8C/2D
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/2C Group, R8C/2D Group
Rev.2.00
REJ09B0339-0200
Figure 16.18
NOTE:
(4)
(5)
(1)
(2)
(3)
(6)
Dec 05, 2007
1. Write 0 after reading 1 to set the TEND bit to 0.
SSSR register
SSER register
Sample Flowchart of Data Transmission/Reception (Clock Synchronous
Communication Mode)
Write transmit data to SSTDR register
Read receive data in SSRDR register
Read TDRE bit in SSSR register
Read RDRF bit in SSSR register
Read TEND bit in SSSR register
No
Page 418 of 585
transmission
RDRF = 1 ?
TEND = 1 ?
Initialization
TDRE = 1 ?
continues?
Start
Data
End
TEND bit ← 0
RE bit ← 0
TE bit ← 0
Yes
Yes
No
Yes
(2)
No
No
(1)
Yes
(2) Confirm that the RDRF bit is set to 1. If the RDRF
(3) Determine whether the data transmission
(4) When the data transmission is completed, the
(5) Set the TEND bit to 0 and bits RE and TE in
(6) the SSER register to 0 before ending transmit/
(1) After reading the SSSR register and confirming
bit is set to 1, read the receive data in the SSRDR
register. When the SSRDR register is read, the
RDRF bit is automatically set to 0.
continues
TEND bit in the SSSR register is set to 1.
that the TDRE bit is set to 1, write the transmit
data to the SSTDR register. When the transmit
data is written to the SSTDR register, the TDRE
bit is automatically set to 0.
receive mode.
16. Clock Synchronous Serial Interface