HD64F3026X25 Renesas Electronics America, HD64F3026X25 Datasheet - Page 337

• Manufacturer Part Number: HD64F3026X25
• Description: MCU 3V 256K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3026X25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Setting Input Capture Operation in 8-Bit Timer Mode (Normal Operation)
Note: When TCORB1 in channel 1 is used for input capture, TCORB0 in channel 0 cannot be
Setting Input Capture Operation in 16-Bit Count Mode
Channel 1:
Channel 3:
Channels 0 and 1:
Channels 2 and 3:
Set TCORB1 as an 8-bit input capture register with the ICE bit in 8TCSR1.
Select rising edge, falling edge, or both edges as the input edge(s) for the input capture
signal (TMIO
Select the input clock with bits CKS2 to CKS0 in 8TCR1, and start the 8TCNT count.
Set TCORB3 as an 8-bit input capture register with the ICE bit in 8TCSR3.
Select rising edge, falling edge, or both edges as the input edge(s) for the input capture
signal (TMIO
Select the input clock with bits CKS2 to CKS0 in 8TCR3, and start the 8TCNT count.
In 16-bit count mode, TCORB0 and TCORB1 function as a 16-bit input capture register
when the ICE bit is set to 1 in 8TCSR1.
Select rising edge, falling edge, or both edges as the input edge(s) for the input capture
signal (TMIO
bits OIS3 and OIS2 in 8TCSR1 are ignored.)
Select the input clock with bits CKS2 to CKS0 in 8TCR1, and start the 8TCNT count.
In 16-bit count mode, TCORB2 and TCORB3 function as a 16-bit input capture register
when the ICE bit is set to 1 in 8TCSR3.
Select rising edge, falling edge, or both edges as the input edge(s) for the input capture
signal (TMIO
bits OIS3 and OIS2 in 8TCSR3 are ignored.)
Select the input clock with bits CKS2 to CKS0 in 8TCR3, and start the 8TCNT count.
used as a compare match register.
Similarly, when TCORB3 in channel 3 is used for input capture, TCORB2 in channel 2
cannot be used as a compare match register.
1
3
1
3
) with bits OIS3 and OIS2 in 8TCSR1.
) with bits OIS3 and OIS2 in 8TCSR3.
) with bits OIS3 and OIS2 in 8TCSR0. (In 16-bit count mode, the settings of
) with bits OIS3 and OIS2 in 8TCSR2. (In 16-bit count mode, the settings of
Rev. 2.00 Sep 20, 2005 page 297 of 800
Section 9 8-Bit Timers
REJ09B0260-0200