HD64F3026X25 Renesas Electronics America, HD64F3026X25 Datasheet - Page 372

• Manufacturer Part Number: HD64F3026X25
• Description: MCU 3V 256K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3026X25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 10 Programmable Timing Pattern Controller (TPC)
10.3.4
Sample Setup Procedure for Non-Overlapping TPC Output: Figure 10.6 shows a sample
procedure for setting up non-overlapping TPC output.
Rev. 2.00 Sep 20, 2005 page 332 of 800
REJ09B0260-0200
16-bit timer
setup
16-bit timer
setup
Port and
TPC setup
Figure 10.6 Setup Procedure for Non-Overlapping TPC Output (Example)
Non-Overlapping TPC Output
Select non-overlapping groups
Select TPC transfer trigger
Select counting operation
Set next TPC output data
Set next TPC output data
Select interrupt requests
Set initial output data
Enable TPC transfer
Select GR functions
Compare match A?
Set up TPC output
Non-overlapping
Set GR values
Start counter
TPC output
Yes
No
1
2
3
4
5
6
7
8
9
10
11
12
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Set TIOR to make GRA and GRB output
compare registers (with output inhibited).
Set the TPC output trigger period in GRB
and the non-overlap margin in GRA.
Select the counter clock source with bits
TPSC2 to TPSC0 in TCR. Select the counter
clear source with bits CCLR1 and CCLR0.
Enable the IMFA interrupt in TISRA.
Set the initial output values in the DR bits
of the input/output port pins to be used for
TPC output.
Set the DDR bits of the input/output port pins
to be used for TPC output to 1.
Set the NDER bits of the pins to be used for
TPC output to 1.
In TPCR, select the 16-bit timer compare
match event to be used as the TPC output
trigger.
In TPMR, select the groups that will operate
in non-overlap mode.
Set the next TPC output values in the NDR
bits.
Set the STR bit to 1 in TSTR to start the timer
counter.
At each IMFA interrupt, write the next output
value in the NDR bits.