HD64F3026X25 Renesas Electronics America, HD64F3026X25 Datasheet - Page 368

• Manufacturer Part Number: HD64F3026X25
• Description: MCU 3V 256K 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD64F3026X25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 10 Programmable Timing Pattern Controller (TPC)
10.3
10.3.1
When corresponding bits in PADDR or PBDDR and NDERA or NDERB are set to 1, TPC output
is enabled. The TPC output initially consists of the corresponding PADR or PBDR contents.
When a compare-match event selected in TPCR occurs, the corresponding NDRA or NDRB bit
contents are transferred to PADR or PBDR to update the output values.
Figure 10.2 illustrates the TPC output operation. Table 10.3 summarizes the TPC operating
conditions.
Table 10.3 TPC Operating Conditions
Sequential output of up to 16-bit patterns is possible by writing new output data to NDRA and
NDRB before the next compare match. For information on non-overlapping operation, see
section 10.3.4, Non-Overlapping TPC Output.
Rev. 2.00 Sep 20, 2005 page 328 of 800
REJ09B0260-0200
NDER
0
1
TPC output pin
Operation
Overview
DDR
0
1
0
1
DDR
Q
Pin Function
Generic input port
Generic output port
Generic input port (but the DR bit is a read-only bit, and when compare
match occurs, the NDR bit value is transferred to the DR bit)
TPC pulse output
Figure 10.2 TPC Output Operation
Q
NDER
Q
DR
C
Output trigger signal
D
Q
NDR
D
Internal
data bus