EVB9S12XEP100 Freescale Semiconductor, EVB9S12XEP100 Datasheet - Page 731

• Manufacturer Part Number: EVB9S12XEP100
• Description: BOARD EVAL FOR MC9S12XEP100
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of EVB9S12XEP100

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MC9S12XEP100
• Data Bus Width: 16 bit
• Interface Type: RS-232
• Silicon Manufacturer: Freescale
• Core Architecture: S12
• Core Sub-architecture: S12
• Silicon Core Number: MC9S12
• Silicon Family Name: S12XE
• Rohs Compliant: Yes
• For Use With/related Products: MC9S12XEP100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

20.3.2.2
Read: Anytime, if AMAP = 0.
Write: Anytime, if AMAP = 0.
Freescale Semiconductor
Module Base + 0x0002
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
SCISWAI
LOOPS
Reset
RSRC
WAKE
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
Field
M
7
6
5
4
3
W
R
LOOPS
Loop Select Bit — LOOPS enables loop operation. In loop operation, the RXD pin is disconnected from the SCI
and the transmitter output is internally connected to the receiver input. Both the transmitter and the receiver must
be enabled to use the loop function.
0 Normal operation enabled
1 Loop operation enabled
The receiver input is determined by the RSRC bit.
SCI Stop in Wait Mode Bit — SCISWAI disables the SCI in wait mode.
0 SCI enabled in wait mode
1 SCI disabled in wait mode
Receiver Source Bit — When LOOPS = 1, the RSRC bit determines the source for the receiver shift register
input. See
0 Receiver input internally connected to transmitter output
1 Receiver input connected externally to transmitter
Data Format Mode Bit — MODE determines whether data characters are eight or nine bits long.
0 One start bit, eight data bits, one stop bit
1 One start bit, nine data bits, one stop bit
Wakeup Condition Bit — WAKE determines which condition wakes up the SCI: a logic 1 (address mark) in the
most significant bit position of a received data character or an idle condition on the RXD pin.
0 Idle line wakeup
1 Address mark wakeup
SCI Control Register 1 (SCICR1)
0
7
This register is only visible in the memory map if AMAP = 0 (reset
condition).
Table
SCISWAI
0
6
20-5.
TNP[1:0]
Figure 20-5. SCI Control Register 1 (SCICR1)
11
10
01
00
MC9S12XE-Family Reference Manual Rev. 1.23
Table 20-3. IRSCI Transmit Pulse Width
Table 20-4. SCICR1 Field Descriptions
RSRC
5
0
NOTE
M
0
4
Narrow Pulse Width
Description
WAKE
1/32
1/16
3/16
1/4
Chapter 20 Serial Communication Interface (S12SCIV5)
0
3
ILT
2
0
PE
0
1
PT
0
0
731