LAN91C111I-NS SMSC, LAN91C111I-NS Datasheet - Page 102

• Manufacturer Part Number: LAN91C111I-NS
• Description: IC ETHERNET CTLR MAC PHY 128-QFP
• Manufacturer: SMSC
• Type: Single Chip MAC and PHYr

Specifications of LAN91C111I-NS

• Controller Type: Ethernet Controller, MAC/PHY
• Interface: Serial EEPROM
• Voltage - Supply: 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 128-QFP
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: IEEE 802.3 or IEEE 802.3u
• Data Rate: 10 Mbps or 100 Mbps
• Supply Voltage (max): 5 V
• Supply Voltage (min): 0 V
• Supply Current (max): 140 mA
• Maximum Operating Temperature: + 85 C
• Ethernet Connection Type: 100BASE-T or 100BASE-T4 or 100BASE-TX or 10BASE-T
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 638-1014

Revision 1.91 (06-01-09)
EISA BUS
SIGNAL
LA2-LA15
M/nIO
AEN
A1-A15, AEN
ISA BUS
EISA 32 BIT SLAVE
On EISA the LAN91C111 is accessed as a 32 bit I/O slave, along with a Slave DMA type "C" data
path option. As an I/O slave, the LAN91C111 uses asynchronous accesses. In creating nRD and nWR
inputs, the timing information is externally derived from nCMD edges. Given that the access will be at
least 1.5 to 2 clocks (more than 180ns at least) there is no need to negate EXRDY, simplifying the
EISA interface implementation. As a DMA Slave, the LAN91C111 accepts burst transfers and is able
to sustain the peak rate of one doubleword every BCLK. Doubleword alignment is assumed for DMA
transfers. The LAN91C111 will sample EXRDY and postpone DMA cycles if the memory cycle solicits
wait states.
nIOCS16
D0-D15
RESET
nIOWR
nSBHE
nIORD
VCC
IRQ
A0
LAN91C111
SIGNAL
A2-A15
AEN
Table 12.3 EISA 32 Bit Slave Signal Connections
Figure 12.2 LAN91C111 on ISA BUS
O.C.
NOTES
Address bus used for I/O space and register decoding, latched by
nADS (nSTART) trailing edge.
Qualifies valid I/O decoding - enabled access when low. These
signals are externally ORed. Internally the AEN pin is latched by
nADS rising edge and transparent while nADS is low.
DATASHEET
A1-A15, AEN
RESET
nBE2, nBE3
D0-D15
INTR0
nRD
nWR
nBE0
nBE1
102
nLDEV
LAN91C111
10/100 Non-PCI Ethernet Single Chip MAC + PHY
SMSC LAN91C111 REV C
Datasheet