MC9S12XEP100MAL Freescale Semiconductor, MC9S12XEP100MAL Datasheet - Page 1178

IC MCU 16BIT 1M FLASH 112-LQFP

MC9S12XEP100MAL

Manufacturer Part Number
MC9S12XEP100MAL
Description
IC MCU 16BIT 1M FLASH 112-LQFP
Manufacturer
Freescale Semiconductor
Series
HCS12r
Datasheet

Specifications of MC9S12XEP100MAL

Core Processor
HCS12X
Core Size
16-Bit
Speed
50MHz
Connectivity
CAN, EBI/EMI, I²C, IrDA, SCI, SPI
Peripherals
LVD, POR, PWM, WDT
Number Of I /o
91
Program Memory Size
1MB (1M x 8)
Program Memory Type
FLASH
Eeprom Size
4K x 8
Ram Size
64K x 8
Voltage - Supply (vcc/vdd)
1.72 V ~ 5.5 V
Data Converters
A/D 16x12b
Oscillator Type
External
Operating Temperature
-40°C ~ 125°C
Package / Case
112-LQFP
Processor Series
S12XE
Core
HCS12
Data Bus Width
16 bit
Data Ram Size
64 KB
Interface Type
SPI, SSI
Maximum Clock Frequency
50 MHz
Number Of Programmable I/os
91
Number Of Timers
25
Operating Supply Voltage
- 0.3 V to + 6 V
Maximum Operating Temperature
+ 105 C
Mounting Style
SMD/SMT
3rd Party Development Tools
EWHCS12
Development Tools By Supplier
KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
Minimum Operating Temperature
- 40 C
On-chip Adc
10 bit, 16 Channel
For Use With
EVB9S12XEP100 - BOARD EVAL FOR MC9S12XEP100DEMO9S12XEP100 - BOARD DEMO FOR MC9S12XEP100
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MC9S12XEP100MAL
Manufacturer:
FREESCALE
Quantity:
4 500
Part Number:
MC9S12XEP100MAL
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Part Number:
MC9S12XEP100MAL
Manufacturer:
FREESCALE
Quantity:
4 500
Part Number:
MC9S12XEP100MAL
Manufacturer:
FREESCALE
Quantity:
20 000
Part Number:
MC9S12XEP100MAL
0
Chapter 29 1024 KByte Flash Module (S12XFTM1024K5V2)
29.4.2
This section provides details of all available Flash commands launched by a command write sequence. The
ACCERR bit in the FSTAT register will be set during the command write sequence if any of the following
illegal steps are performed, causing the command not to be processed by the Memory Controller:
If a Flash block is read during execution of an algorithm (CCIF = 0) on that same block, the read operation
will return invalid data. If the SFDIF or DFDIF flags were not previously set when the invalid read
operation occurred, both the SFDIF and DFDIF flags will be set and the FECCR registers will be loaded
with the global address used in the invalid read operation with the data and parity fields set to all 0.
If the ACCERR or FPVIOL bits are set in the FSTAT register, the user must clear these bits before starting
any command write sequence (see
1178
FCMD
0x0D
0x0B
0x0E
0x0F
0x08
0x10
0x11
0x12
0x13
0x14
0x15
0x20
Starting any command write sequence that programs or erases Flash memory before initializing the
FCLKDIV register
Writing an invalid command as part of the command write sequence
For additional possible errors, refer to the error handling table provided for each command
Flash Command Description
Disable EEPROM
Program D-Flash
Enable EEPROM
Emulation Query
Partition D-Flash
Erase All Blocks
Set User Margin
Set Field Margin
Unsecure Flash
Full Partition D-
Erase Verify D-
Erase D-Flash
Flash Section
Command
Emulation
Emulation
EEPROM
Sector
Flash
Level
Level
Erase all D-Flash (and P-Flash) blocks.
An erase of all Flash blocks is only possible when the FPLDIS, FPHDIS, and FPOPEN
bits in the FPROT register and the EPDIS and EPOPEN bits in the EPROT register are
set prior to launching the command.
Supports a method of releasing MCU security by erasing all D-Flash (and P-Flash) blocks
and verifying that all D-Flash (and P-Flash) blocks are erased.
Specifies a user margin read level for the D-Flash block.
Specifies a field margin read level for the D-Flash block (special modes only).
Erase the D-Flash block and partition an area of the D-Flash block for user access.
Verify that a given number of words starting at the address provided are erased.
Program up to four words in the D-Flash block.
Erase all bytes in a sector of the D-Flash block.
Enable EEPROM emulation where writes to the buffer RAM EEE partition will be copied
to the D-Flash EEE partition.
Suspend all current erase and program activity related to EEPROM emulation but leave
current EEE tags set.
Returns EEE partition and status variables.
Partition an area of the D-Flash block for user access.
MC9S12XE-Family Reference Manual , Rev. 1.23
Section
Table 29-32. D-Flash Commands
29.3.2.7).
Function on D-Flash Memory
Freescale Semiconductor

Related parts for MC9S12XEP100MAL