TMP92xy22FG Toshiba, TMP92xy22FG Datasheet - Page 128

• Manufacturer Part Number: TMP92xy22FG
• Manufacturer: Toshiba

Specifications of TMP92xy22FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 32
• Architecture: 32-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: -
• Adc 10-bit Channel: 8
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: -
• Number Of I/o Ports: 50
• Power Supply Voltage(v): 3.0 to 3.6

(6) Comparators (CP10 and CP11)
(7) Timer flip-flop (TB0FF0 and TB0FF1)
UC10 with the value set in TB0RG0H/L or TB0RG1H/L respectively, in order to detect
a match. If a match is detected, the comparator generates an interrupt (INTTB00 or
INTTB01 respectively).
the comparators and the latch signals to the capture registers. Inversion can be
enabled and disabled for each element using TB0FFCR<TB0C0T1, TB0E1T1,
TB0E0T1>.
programmed to TB0FFCR<TB0FF0C1:0> or <TB0FF1C1:0>, TB0FF0 will be inverted.
If “01” is programmed to the capture registers, the value of TB0FF0 will be set to “1”. If
“10” is programmed to the capture registers, the value of TB0FF0 will be cleared to “0”.
shared with PC6). Timer output should be specified using the port C function register.
CP10 and CP11 are 16-bit comparators which compare the value in the up counter
These flip-flops (TB0FF0 and TB0FF1) are inverted by the match detect signals from
After a reset the values of TB0FF0 and TB0FF1 are undefined. If “00” is
The values of TB0FF0 can be output via the timer output pins TB0OUT0 (which is
92CM22-126
TMP92CM22
2007-02-16