TMP92xy22FG Toshiba, TMP92xy22FG Datasheet - Page 148

• Manufacturer Part Number: TMP92xy22FG
• Manufacturer: Toshiba

Specifications of TMP92xy22FG

• Package: LQFP100
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 32
• Architecture: 32-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: -
• Adc 10-bit Channel: 8
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: -
• Number Of I/o Ports: 50
• Power Supply Voltage(v): 3.0 to 3.6

(2) Baud rate generator
that determine the transfer rate of the serial channels.
the 6-bit prescaler which is shared by the timers. One of these input clocks is selected
using the BR0CR<BR0CK1:0> field in the baud rate generator control register.
1 or N + (16 − K)/16 to 16 values, determining the transfer rate.
BR0ADD<BR0K3:0>.
•
•
(1) When BR0CR<BR0ADDE> = 0
(2) When BR0CR<BR0ADDE> = 1
The baud rate generator is a circuit that generates transmission and receiving clocks
The input clock to the baud rate generator, φT0, φT2, φT8, or φT32, is generated by
The baud rate generator includes a frequency divider, which divides the frequency by
The transfer rate is determined by the settings of BR0CR<BR0ADDE, BR0S3:0> and
In UART mode
In I/O interface mode
BR0CR<BR0ADDE> to 0 before dividing by N.
used is explained below.
the selected prescaler clock by N (N = 1, 2, 3 ... 16), which is set in
BR0CR<BR0S3:0>.
divides the selected prescaler clock by N + (16 − K)/16 using the value of N (N = 2,
3 ... 15) set in BR0CR<BR0S3:0> and the value of K (K = 1, 2, 3 ... 15) set in
BR0ADD<BR0K3:0>.
•
•
Note: If N = 1 and N = 16, the N + (16 − K)/16 division function is disabled.
The N + (16 − K)/16 division function is not available in I/O interface mode. Clear
The method for calculating the transfer rate when the baud rate generator is
The settings BR0ADD<BR0K3:0> are ignored. The baud rate generator divides
The N + (16 – K)/16 division function is enabled. The baud rate generator
UART mode
I/O interface mode
Baud rate =
Baud rate =
Clear BR0CR<BR0ADDE> register to “0”.
Input clock of baud rate generator
Frequency divider for baud rate generator
Input clock of baud rate generator
Frequency divider for baud rate generator
92CM22-146
÷ 16
÷ 2
TMP92CM22
2007-02-16