LPC1113FHN33/303,5 NXP Semiconductors, LPC1113FHN33/303,5 Datasheet - Page 53

• Manufacturer Part Number: LPC1113FHN33/303,5
• Description: ARM Microcontrollers - MCU Cortex-M0 24 kB flash up to 8kB SRAM
• Manufacturer: NXP Semiconductors

Specifications of LPC1113FHN33/303,5

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: LPC1113
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 24 KB
• Data Ram Size: 4 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 65 C to + 150 C
• Package / Case: HVQFN-33
• Mounting Style: SMD/SMT
• Factory Pack Quantity: 260

4.1 How to read this chapter
4.2 Introduction
4.3 Register description
UM10398
User manual
4.3.1 Power control register
Remark: For parts LPC11(D)1x/102/202/302, also refer to
The PMU controls the Deep power-down mode. Four general purpose register in the PMU
can be used to retain data during Deep power-down mode.
Table 48.
The power control register selects whether one of the ARM Cortex-M0 controlled
power-down modes (Sleep mode or Deep-sleep mode) or the Deep power-down mode is
entered and provides the flags for Sleep or Deep-sleep modes and Deep power-down
modes respectively. See
Table 49.
Name
PCON
GPREG0
GPREG1
GPREG2
GPREG3
GPREG4
Bit
0
1
7:2
UM10398
Chapter 4: LPC111x/LPC11Cxx Power Monitor Unit (PMU)
Rev. 12 — 24 September 2012
Symbol
-
DPDEN
-
Register overview: PMU (base address 0x4003 8000)
Power control register (PCON, address 0x4003 8000) bit description
All information provided in this document is subject to legal disclaimers.
Access
R/W
R/W
R/W
R/W
R/W
R/W
Rev. 12 — 24 September 2012
Value
-
0
1
-
Section 3.9
Description
Reserved. Do not write 1 to this bit.
Deep power-down mode enable
ARM WFI will enter Sleep or Deep-sleep mode (clock to
ARM Cortex-M0 core turned off).
ARM WFI will enter Deep-power down mode (ARM
Cortex-M0 core powered-down).
Reserved. Do not write ones to this bit.
Address
offset
0x000
0x004
0x008
0x00C
0x010
0x014
for details on how to enter the power-down modes.
Description
Power control register
General purpose register 0
General purpose register 1
General purpose register 2
General purpose register 3
General purpose register 4
Chapter 5
for power control.
© NXP B.V. 2012. All rights reserved.
User manual
Reset
value
0x0
0x0
0x0
0x0
0x0
0x0
53 of 538
Reset
value
0x0
0
0x0