LPC1113FHN33/303,5 NXP Semiconductors, LPC1113FHN33/303,5 Datasheet - Page 6

• Manufacturer Part Number: LPC1113FHN33/303,5
• Description: ARM Microcontrollers - MCU Cortex-M0 24 kB flash up to 8kB SRAM
• Manufacturer: NXP Semiconductors

Specifications of LPC1113FHN33/303,5

• Rohs: yes
• Core: ARM Cortex M0
• Processor Series: LPC1113
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 50 MHz
• Program Memory Size: 24 KB
• Data Ram Size: 4 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 1.8 V to 3.6 V
• Operating Temperature Range: - 65 C to + 150 C
• Package / Case: HVQFN-33
• Mounting Style: SMD/SMT
• Factory Pack Quantity: 260

NXP Semiconductors
1.
UM10398
User manual
For details on the PCF8576D operation, see
•
•
•
•
•
•
– Programmable watchdog oscillator with a frequency range of 7.8 kHz to 1.8 MHz.
– PLL allows CPU operation up to the maximum CPU rate without the need for a
– Clock output function with divider that can reflect the system oscillator clock, IRC
Power control:
– Integrated PMU (Power Management Unit) to minimize power consumption during
– Power profiles residing in boot ROM allowing to optimize performance and
– Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
– Processor wake-up from Deep-sleep mode via a dedicated start logic using up to
– Power-On Reset (POR).
– Brownout detect with up to four separate thresholds for interrupt and forced reset.
Unique device serial number for identification.
Single 3.3 V power supply (1.8 V to 3.6 V).
Available as LQFP48 package, HVQFN33 package.
LPC1100L series also available as HVQFN24, TSSOP28 package, DIP28 package,
TSSOP20 package, and SO20 package.
Available as dual-chip module consisting of the LPC1114 single-chip microcontroller
combined with a PCF8576D Universal LCD driver in a 100-pin LQFP package (part
LPC11D14FBD100/302).
high-frequency crystal. May be run from the system oscillator or the internal RC
oscillator.
clock, CPU clock, and the Watchdog clock.
Sleep, Deep-sleep, and Deep power-down modes.
minimize power consumption for any given application through one simple function
call. (On LPC1100L and LPC1100XL parts only).
13 of the functional pins.
All information provided in this document is subject to legal disclaimers.
Ref.
Rev. 12 — 24 September 2012
3.
1
Chapter 1: LPC111x/LPC11Cxx Introductory information
UM10398
© NXP B.V. 2012. All rights reserved.
6 of 538