LPC1810FET100,551 NXP Semiconductors, LPC1810FET100,551 Datasheet - Page 460

• Manufacturer Part Number: LPC1810FET100,551
• Description: IC MCU 32BIT 136KB FLSH 100TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC18xxr

Specifications of LPC1810FET100,551

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, I²C, Microwire, SPI, SSI, SSP, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Size: -
• Program Memory Type: ROMless
• Eeprom Size: -
• Ram Size: 136K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

NXP Semiconductors
Table 386. USB endpoint NAK register in device mode (ENDPTNAK - address 0x4000 7178) bit description
<Document ID>
User manual
Bit
3:0
15:6
19:16 EPTN
31:20 -
Symbol
EPRN
-
21.6.13.2 Host mode
21.6.14.1 Device mode
21.6.14 USB Endpoint NAK Enable register (ENDPTNAKEN)
This register is not used in host mode.
Each bit in this register enables the corresponding bit in the ENDPTNAK register. Each Tx
and Rx endpoint has a bit in the EPTNE and EPRNE field respectively.
Description
Rx endpoint NAK
Each RX endpoint has one bit in this field. The bit is set when the device
sends a NAK handshake on a received OUT or PING token for the
corresponding endpoint.
Bit 3 corresponds to endpoint 3.
...
Bit 1 corresponds to endpoint 1.
Bit 0 corresponds to endpoint 0.
Reserved
Tx endpoint NAK
Each TX endpoint has one bit in this field. The bit is set when the device
sends a NAK handshake on a received IN token for the corresponding
endpoint.
Bit 3 corresponds to endpoint 3.
...
Bit 1 corresponds to endpoint 1.
Bit 0 corresponds to endpoint 0.
Reserved
All information provided in this document is subject to legal disclaimers.
Rev. 00.13 — 20 July 2011
Chapter 21: LPC18xx USB1 Host/Device controller
UM10430
© NXP B.V. 2011. All rights reserved.
Reset
value
0x00
-
0x00
-
460 of 1164
Access
R/WC
-
R/WC
-