mt90502ag2 Zarlink Semiconductor, mt90502ag2 Datasheet - Page 28
mt90502ag2
Manufacturer Part Number
mt90502ag2
Description
Multi-channel Aal2 Sar
Manufacturer
Zarlink Semiconductor
Datasheet
1.MT90502AG2.pdf
(204 pages)
- Current page: 28 of 204
- Download datasheet (2Mb)
Each entry in TX CAM is one of the following four types:
1. The TSST in that entry carries PCM or ADPCM data. An xxPCM Channel Number should be assigned.
2. The TSST in that entry belongs to an HDLC stream. An HDLC Stream Number should be assigned.
3. The TSST in that entry is a loopback channel. A Low-Latency Loopback (LLL) Channel Number should be
4. The TSST in that entry is a phasing channel. The device will use the data on that TSST to synchronize its inter-
Each TSST that carries PCM, ADPCM or HDLC data needs a CPS-Packet assembly structure in TX TDM Control
memory to have CPS-Packets assembled. The xxPCM channel number and HDLC Stream Number are used to
indicate the memory location of the CPS-Packet assembly structure and the CPS-Packet final assembly structure.
2.2.1
A low-latency loopback (LLL) is a connection between any TX TDM channel and any RX TDM channel. Up to 128
loopback connections can be established.
Channels designated as LLL channels in the TX CAM are written directly into the appropriate location in the LLL
memory of the RX TDM module. Once there, they are routed out to TSSTs that are assigned the same LLL channel
numbers in RX CAM.
2.2.2
PCM and ADPCM data is accumulated in a CPS-Packet circular buffer in TX SSRAM until the number of bytes
pending equals the length of the AAL2 CPS-Packet to be assembled, as specified in the number of EDUs (# EDU)
field of the PCM/ADPCM CPS-Packet assembly structure for that xxPCM channel. The TX TDM is capable of
treating PCM at 64 kbps and compressed ADPCM at 40, 32, 24, or 16 kbps. For the compressed ADPCM
channels, instead of capturing all 8-bits in an incoming TDM byte, the MT90502 will only sample 5-, 4-, 3-, or 2-bits
of the byte, according to the data rate. The MT90502 can be configured to sample either the MSBs or the LSBs of
TDM bytes; the configuration applies to all compressed channels.
assigned.
nal phase/sub-phase operation.
Low-Latency Loopback Channels
Treatment of PCM/ADPCM Data
Zarlink Semiconductor Inc.
MT90502
28
Data Sheet
Related parts for mt90502ag2
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Multi-Channel AAL2 SAR
Manufacturer:
Zarlink Semiconductor, Inc.
Datasheet:
Part Number:
Description:
Zarlink Semiconductor Inc [TV IF PREAMPLIFIER]
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
256 x 256 Channels (8 TDM Streams @ 2.048Mb/s) Non-blocking Digital Switch (DX)
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Video Programme Delivery Control Interface Circuit
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
SP8719520MHz LOW CURRENT TWO-MODULUS DIVIDERS
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
REMOTE CONTROL RECEIVER
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
2·5GHz ÷8192 PRESCALER
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
1·3GHz 4256 PRESCALER WITH LOW CURRENT AND LOW RADIATION
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet:
Part Number:
Description:
Manufacturer:
Zarlink Semiconductor
Datasheet: