HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 883

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

Port
SCPT
SCPT
SCPT
SCPT
SCPT
SCPT
SCPT
SCPT
—
—
—
—
—
Notes: 1. SCPT0, SCPT2, and SCPT4 are different input pins and output pins, but the accessed
2. For pins with which PCC or USB pin multiplex controller related pins are multiplexed,
3. Enabled when ASEMD0 is low.
Port Function
(Related Module)
SCPT7 in (port)/IRQ5 in (INTC)
SCPT6 in/out (port)
SCPT5 in/out (port)
SCPT4 in (port) *
SCPT4 out (port) *
SCPT3 in/out (port)
SCPT2 in (port) *
SCPT2 out (port) *
SCPT1 in/out (port)
SCPT0 in (port) *
SCPT0 out (port) *
—
—
—
—
—
data register is the same.
other functions (in normal operation) and other functions (with special settings) are
switched according to the setting of the P0USE bit in PCC, the A6PCM bit in BSC, and
a USB pin multiplex controller register setting.
To enable a PCC pin, set A6PCM and P0USE to use of a PC card. Switching to the
PCC pin is performed automatically according to the value of the two bits.
For I/O ports with which PCC or USB pin multiplex controller related pins are
multiplexed, do not change the P0USE bit in PCC, the A6PCM bit in BSC, or the USB
pin multiplex controller register, after switching to the other function.
1
1
1
1
1
1
Other Function 1
(Related Module)
CTS2 in (SCIF)/IRQ5 in (INTC)
SIOFSYNC in/out (SIOF)
SCK_SIO in/out (SIOF)
SIOMCLK in (SIOF)
SCK0 in/out (SCI)
RxD0 in (SCI)
TxD0 out (SCI)
AFE_SCLK in (AFE)
Reserved
RTS2 out (SCIF)
DRAK0 out (DMAC)
DACK0 out (DMAC)
RxD2 in (SCIF)
TxD2 out (SCIF)
RxD_SIO in (SIOF)
TxD_SIO out (SIOF)
Rev.6.00 Mar. 27, 2009 Page 825 of 1036
Section 26 Pin Function Controller (PFC)
Other Function 2
(Related Module)
USB1d_TXDPLS out (USB)
USB1d_SUSPEND out (USB)
USB1d_TXENL out (USB)
PCC0RESET out (PCC)
PCC0DRV out (PCC)
REJ09B0254-0600