HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 956

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

Section 30 PC Card Controller (PCC)
Bit 4—PCC0 Status Change (P0SC): Indicates a change in the value of the STSCHG pin of the
PC card when the PC card connected to area 6 is the I/O card interface type. When the STSCHG
pin is changed from 1 to 0, the P0SC bit is set to 1. When STSCHG pin is not changed, the P0SC
bit remains at 0. Write 0 to bit 4 when this bit is set to 1 in order to clear this bit to 0. This bit is
not changed if 1 is written. This bit always reads 0 on the IC memory card interface.
Bit 4: P0SC
0
1
Bit 3—PCC0 Card Detect Change (P0CDC): Indicates a change in the value of the CD1 and
CD2 pins in the PC card connected to area 6. When the CD1 and CD2 values are changed, the
P0CDC bit is set to 1. When the values are not changed, the P0CDC bit remains at 0. Write 0 to
bit 3 in order to clear this bit to 0. This bit is not changed if 1 is written.
Bit 3: P0CDC
0
1
Bit 2—PCC0 Ready Change (P0RC): Indicates a change in the value of the RDY/BSY pin of
the PC card when the PC card connected to area 6 is the IC memory card interface type. When the
RDY/BSY pin is changed from 0 to 1, the P0RC bit is set to 1. When the RDY/BSY pin is not
changed, the P0RC bit remains at 0. Write 0 to bit 2 in order to clear this bit to 0. This bit is not
changed if 1 is written. This bit always reads 0 on the I/O card interface.
Bit 2: P0RC
0
1
Rev.6.00 Mar. 27, 2009 Page 898 of 1036
REJ09B0254-0600
Description
STSCHG pin of the PC card is not changed when the PC card is on the I/O
card interface
STSCHG pin of the PC card is changed from 1 to 0 when the PC card is on
the I/O card interface
Description
CD1 and CD2 pins in the PC card are not changed
CD1 and CD2 pins in the PC card are changed
Description
RDY/BSY pin in the PC card is not changed when the PC card is on the IC
memory card interface
RDY/BSY pin in the PC card is changed from 0 to 1 when the PC card is on
the IC memory card interface
(Initial value)
(Initial value)
(Initial value)