CJ1W-NC214 Omron, CJ1W-NC214 Datasheet - Page 111

• Manufacturer Part Number: CJ1W-NC214
• Description: High Speed Pulse Train 2 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC214

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)
Direct Operation Procedure
2. Select the axis you want to perform JOG operation/inching operation.
3. Enter the values of acceleration time, deceleration time, speed command and
4. If you are using the RUN output of the PCU, click the [RUN Signal ON] button to turn
5. Select [JOG Execution] or [Inching].
6. Execute the operation.
1. Select the [Direct Operation] tab on the manual operation window.
2. Select the axis you want to perform direct operation for.
3. Enter the values of acceleration time, deceleration time, speed command and
4. If you are using the RUN output of the PCU, click the [RUN Signal ON] button to turn
5. Select [Absolute Move] or [Relative Move].
6. Execute the operation.
override for JOG operation/inching operation, and click the [Apply] button.
Be sure to click the [Apply] button before you execute JOG operation/inching operation.
ON the RUN output.
If you select [Inching], enter the amount of movement.
In the case of JOG operation, the axis operates while you press the button.
The window below appears.
position command, and click the [Apply] button.
Be sure to click the [Apply] button before you execute operation.
ON the RUN output.
Also specify the operating direction if the COUNT mode of the selected axis is ROTATION
AXIS mode and you want to perform absolute movement.
3-5 Manual Operation with CX-Programmer
3-18
3