CJ1W-NC214 Omron, CJ1W-NC214 Datasheet - Page 8

• Manufacturer Part Number: CJ1W-NC214
• Description: High Speed Pulse Train 2 Axes
• Manufacturer: Omron

Specifications of CJ1W-NC214

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Precautions
6
4. Operating Environment Precautions
5. Application Precautions
Caution
Caution
Caution
WARNING
Caution
Do not operate the control system in the following locations:
Take appropriate and sufficient countermeasures when installing systems in the following
locations:
The operating environment of the PLC System can have a large effect on the longevity and
reliability of the system. Improper operating environments can lead to malfunction, failure,
and other unforeseeable problems with the PLC System. Be sure that the operating
environment is within the specified conditions at installation and remains within the specified
conditions during the life of the system.
Observe the following precautions when using the PCU or the PLC.
Failure to abide by the following precautions could lead to serious or possibly fatal injury.
Always heed these precautions.
Failure to abide by the following precautions may lead to faulty operation of the PLC, the
PCU, or the system, or could damage the PLC or PCU. Always heed these precautions.
• Locations subject to direct sunlight.
• Locations subject to temperatures or humidity outside the range specified in the
• Locations subject to condensation as the result of severe changes in temperature.
• Locations subject to corrosive or flammable gases.
• Locations subject to dust (especially iron dust) or salts.
• Locations subject to exposure to water, oil, or chemicals.
• Locations subject to shock or vibration.
• Locations subject to static electricity or other forms of noise.
• Locations subject to strong electromagnetic fields.
• Locations subject to possible exposure to radioactivity.
• Locations close to power supplies.
• Always connect to a ground of 100 Ω or less when installing the Units. Not connecting
• Always turn OFF the power supply to the PLC before attempting any of the following.
• Fail-safe measures must be taken by the customer to ensure safety in the event of
• Interlock circuits, limit circuits, and similar safety measures in external circuits (i.e., not
• Install external breakers and take other safety measures against short-circuiting in
specifications.
to a ground of 100 Ω or less may result in electric shock.
Not turning OFF the power supply may result in malfunction or electric shock.
incorrect, missing, or abnormal signals caused by broken signal lines, momentary
power interruptions, or other causes.
in the Programmable Controller) must be provided by the customer.
• Mounting or dismounting Power Supply Units, I/O Units, CPU Units, Memory
• Assembling the Units.
• Setting DIP switches or rotary switches.
• Connecting cables or wiring the system.
• Connecting or disconnecting the connectors.
Cassettes, or any other Units.
CJ Position Control Units OPERATION MANUAL (CJ1W-NC214/234/414/434)