AT90CAN32 Automotive Atmel Corporation, AT90CAN32 Automotive Datasheet - Page 284

• Manufacturer Part Number: AT90CAN32 Automotive
• Manufacturer: Atmel Corporation

Specifications of AT90CAN32 Automotive

• Flash (kbytes): 32 Kbytes
• Pin Count: 64
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 53
• Ext Interrupts: 8
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Can: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 2
• Eeprom (bytes): 1024
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 4
• Output Compare Channels: 8
• Input Capture Channels: 2
• Pwm Channels: 7
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

284
AT90CAN32/64/128
For single ended conversion, the result is:
where V
Table 21-3 on page 286
0x3FF represents the selected reference voltage minus one LSB.
If differential channels are used, the result is:
where V
GAIN the selected gain factor and V
in two’s complement form, from 0x200 (-512d) through 0x1FF (+511d). Note that if the user
wants to perform a quick polarity check of the result, it is sufficient to read the MSB of the result
(ADC9 in ADCH). If the bit is one, the result is negative, and if this bit is zero, the result is posi-
tive.
Table 82 shows the resulting output codes if the differential input channel pair (ADCn - ADCm) is
selected with a reference voltage of V
Figure 21-14. Differential Measurement Range
Figure 21-14
IN
POS
- V
is the voltage on the selected input pin and V
REF
is the voltage on the positive input pin, V
shows the decoding of the differential input range.
and
Table 21-4 on page
ADC
REF
Output Code
REF
0x3FF
ADC
=
the selected voltage reference. The result is presented
.
0x1FF
0x000
0x200
(
----------------------------------------------------------------------- -
V
=
POS
0
V
--------------------------
IN
V
–
⋅
REF
287). 0x000 represents analog ground, and
V
1023
NEG
NEG
V
REF
REF
) GAIN 512
⋅
the voltage on the negative input pin,
the selected voltage reference (see
⋅
V
REF
7682C–AUTO–04/08
Differential
Voltage (Volt